Dark Light

How to Remove Mold Naturally Using Spooky2 Rife Machine 42

Share this:

Have you seen mold in your kitchen or washing room? Are you living in a basement with mold? Or are you living near the ocean or in a humid weather? If you have mold in your household, well, the good news is now you can use Spooky2 Rife to get rid of them effectively.


Removing Mold with Spooky2 Rife Machine

Spooky2 can help you get rid of mold in your living area, and it can also remove mold in your body, thereby effectively reducing the symptoms caused by mold.

If you are new to Rife, please click here.

There are two ways of removing mold with Spooky2:

  • Remote mode
  • Plasma mode
Remote Mode:

To make it clearer, you could divide the whole process into two parts.
Part 1: Kill mold in your living area.
Part 2: Help your body to stay away from molds.

Remote Mode

Part 1 Details:
Find the black mold in your living area, swab it in paper masking tape, and put it in your Spooky2 Remote v2.0 to kill mold spores in your living environment, basement, car, etc.
Connect Remote v2.0 to your generator. (If you don’t know how, please check here)

Launch Spooky2 software, go to Presets tab, click >Environmental >Remote, and choose preset you need according to Notes on the right.

Now go to Control tab, tick the Overwrite Generator checkbox, then choose your Generator port. Click the Start button to run the preset. Run it non-stop until successful.

Part 2 Details:
Connect three Remotes to three generators.
Use your nail as DNA sample, cut three pieces of nail and place one in each Spooky2 Remote.
If you don’t know how to use several generators at the same time, see it here.

Generator A: Kill Molds inside Your Body
Go to Presets tab, click >Shell (Empty) Presets >Remote >Killing (R) – JW
Then go to Programs tab, search “mold” and choose the suitable programs according to Program Description.
Now go to Control tab, tick the Overwrite Generator checkbox, then click a pink/red Generator Button.

Generator B: Help with Symptoms Caused by Molds
Go to Presets tab, click >Shell (Empty) Presets >Remote >Healing (R) – JW
Refer to the list of symptoms caused by mold. Search the Spooky2 database for the appropriate programs in Programs tab.

Here are some of the symptom programs people are choosing from Spooky2 database to remove mold:
Sore/hoarse throat
Cold and flu symptoms (headaches, slight fever, and muscle aches)
Tingling or burning of nose, mouth, and perspiration areas (under the arms or between the legs)
Chronic fatigue
Memory loss
Attention deficit/concentration problems
Personality changes such as irritability or depression
Neurological disorders such as tremors
Hair loss
Coughing with blood
Bleeding in the lungs (hemosiderosis)
Damage to internal organs including blood, liver, kidneys, and lungs

Now go to Control tab, tick the Overwrite Generator checkbox , then click a pink/red Generator Button.
Run these programs continuously using a Spooky2 Remote v2.0 until your symptoms are gone.

Generator C: Detox
Go to Presets tab, click >Detox >Remote, choose a preset you need according to Notes (If you don’t know which one to choose, Detox Maintenance (R) – JK is suggested).


Now go to Control tab, tick the Overwrite Generator checkbox, then click a pink/red Generator Button to run the detox preset.

Plasma Mode:

Preset: Mold and Slime 2 Day Home Treatment (P) – JW (Under >Environmental >Plasma > directory)
Time: Two days each session. Run it until the mold is gone.


For more detailed test cases, please click here: Test Cases for Killing Mold Using Plasma Tube


  • We suggest that you leave your room when you remove mold at home (in part 1).
  • When you get a specimen, wear a dust mask to avoid inhaling spores.
  • You need 3 generators for part 2, one for killing the mold inside, one for healing the symptoms due to mold, and the other one for detox. If you only have two generators, you could make two presets in Generator A and Generator B into a preset chain. Click here to know how to do that: https://www.spooky2-mall.com/blog/how-to-create-a-preset-chain/
  • You could also do foot bath at the same time to help cleanse your body. Here is how to do a foot bath with Spooky2: https://www.spooky2-mall.com/blog/how-to-do-foot-bath-using-spooky2-hand-cylinders/
  • Our software is updating all the time, you could use preset above to replace “8-hour sweeps” mentioned by Jeff in Plasma mode.

Special thanks for the support from Chaffee Cline and Jeff Kaczor.

For more details, you can join us in Spooky2 Rife for Life group and post any of your questions here.

Share this:


  1. When using the mold and slime two day home treatment (P) – JW, does it cause the phanotron tube to
    remain solid instead of flashing? Is there something that we are missing in trying to run the program?
    Every time we try to run it the light stays on solid. Please advise.

    Cathleen Veith
    1. Hi,Cathleen. Mold and slime two day home treatment (P) – JW uses Molds and Slime 2-Day Comprehensive Sweep (CUST), so it applies a range of frequencies to plasma, so you will see the plasma tube solid instead of flashing. It’s normal.

  2. So what can I do if I do not know where the mold is? I had an air quality test done and I have 5 strains of mold in my house.
    The only mold I can see is in all of my windows, and it has turned the wood black. We plan to take a sample and start this weekend with the remote method.
    Can a person just add in frequencies for the known molds and run it that way?

    1. Hi, Dina Klein. If you know where the mold is, take a sample in your remote and choose preset, you can learn how to remove mold here: http://bit.ly/2YD53ZZ you can add frequencies if you know the frequencies of the mold, you can create a program: http://bit.ly/2JRyxz7

  3. Thank you, I will give this a try.

    1. Happy Rifing!

  4. How can you do this with only one generator but two remotes?

    1. what generator do you mentioned ? xm generator or generatorX ?

      1. I have a similar question and i have GenX

        1. I would have liked to be able to pay to have mold removed but being retired and living on social security, that simply was not an option. And since not taking baths is also not an option, grin – one of the first things I did when I got my first XM generators was to scrape mold off the tub and put it in a remote. Within 3 days the mold was gone and has not returned, that’s been over a year ago now! Granted, the safest way to handle mold is to let the pro’s do it, but that’s not always possible.

          I would start with the Killing (R) JW template and add mold programs to run such as Molds General ETDF & any others that seem to make sense. If you have the latest remote (clamshell). Be sure to put it on the MN output on the boost. If you have the older remotes use the ‘black’ one if you have it. Can’t hurt to give it a try. (warning: Wearing protect gloves and a safe mask when handling – like a professional has to do) Black mold is dangerous. Back when I collected my sample, I just took some of the paper tape that came with the old remotes and pressed the adhesive to the mold then inserted the tape mounted on a paper strip into the remote.

          1. I have been running all 3 remote mold presets for a week and it made no difference.

            Then I ran Mold General Purpose (Remotely) for 400 hours and there is no difference whatsoever to the mold on my external/internal walls.

          2. Hi, treatment needs time and please kindly try longer time. You can also check this link for how long it needs to see effects:

  5. Hi, with this preset, the emitted light is quite dim. It is almost invisible in daylight. Is that okay?

    1. Yes, this is normal, spooky2 remote LED will be effect by lots of reasons, for example: offset, waveform, frequency. you can refer to this blog:https://www.spooky2-mall.com/blog/how-does-spooky-remote-light/

  6. Do I need extra generators if I have spooky central?

    Sarah seiler
    1. Hi, central needs to work with one generator.

  7. When using the Remote to kill mold, what is its range? Is it affecting the same species of mold everywhere (i.e., quantum entanglement)?

    David Burleigh
    1. Spooky2 Remote allows people to get treatments at any distance using the recipient’s DNA.
      The theory of this magic is “quantum entanglement”, which was referred to as “Spooky action at a distance” by Einstein. https://www.spooky2-mall.com/blog/does-remote-rife-treatment-work/

  8. Anyone has had any results with this? It seems like no one has come out with any results?

    1. Hi, we have received some true feedback from other users, hope they can give you some courage and confidence: https://www.spooky2reviews.com/?s=mold
      Any questions, please feel free to send them to [email protected].

  9. I just bought the Gen Pro X. Can I do these protocols with only this device? It says you need 3 generators?
    Thanks in advance

    1. Hi, of course you can do this. We recommend running three different programs at the same time, but according to your conditions, you can choose two of them to run! Any other questions, please feel free to send them to [email protected], our support team will reply to you ASAP:)

  10. I’m seeing a big difference to alcohol vapor smell from mold. At certain stages it can smell like that very badly. Makes me wheeze a lot.

    After 5 hours the smell was gone, after 7 hours the room is smelling good again, and now we’re 11:26 hours into it out of 12:22 and I’m not pluggy nosed or wheezing anymore… Also my mood/temper tantrums from the mold allergy are finally gone. (Had a day from hell)
    It really seems to be working.
    I don’t know how but if it really does work and sticks, this may well save me.

    1. Hi, glad to know our Spooky2 rife machine can help you. Please hold on running related frequencies and l believe you will get rid of mold completely soon:)

  11. Hi

    If i’m using central and plasma to kill mold with us not being home, can I set it up in any room and it will work? and it will only require one generator is that correct?

    1. Yes, you are right. But you should ensure your plasma and central are in good placement and ensure good ventilation:)

  12. Which plasma tube is more effective? The round one or the long one?

    1. Hi, Phanotron Tube is more used for local treatment, while Straight Tube is better for whole-body treatment. See more details from this blog: https://www.spooky2-mall.com/blog/what-is-the-difference-between-spooky-phanotron-tube-and-spooky-straight-tube/

  13. Can you do the 2 day mold treatment while you are in the home?

    Donna Clayton
    1. Dear Donna, we do not recommend that you be in a room where a mold removal program is running, and the duration of the treatment is up to you, two days is fine. Hope it helps. Any questions, feel free to contact our email: [email protected].

      1. Is it okay to be in the same room when removing mold using Remote?

        1. Dear Sha, when using Spooky2 Remote, you don’t have to be in the same room.

  14. If I have mold in my sinuses, do I need a sinus swab for the right strains to run on killing it in my body, or are there already the correct frequencies in the Rife programs?

    Eva Kuhl Bornefelt
    1. Dear Eva, you can search under the Programs tab to see if there is a frequency you want to run by entering a keyword. You can also find the best frequency for you by doing a Biofeedback Scan, here is a blog to help you understand Biofeedback Scanning: https://www.spooky2-mall.com/blog/understanding-scan-modes-gx-pro-xm-and-scalar/, if you have any questions feel free to contact us at our email: [email protected].

  15. I hate reading instructions and this is the least intuitive box I have ever used….start with go to presets, there are no presets, next go to environmental, it doesn’t exist….and on and on and on. I’m sure it is FABULOUS but it drives me up the wall. No proper tutorials, rubbish clunky software. I just don’t get it. Stupidist most expensive purchase I ever made. I emailed several times never received a response.

    1. Dear Maria, I apologize for the inconvenience. Here’s a course on how to set up Spooky2: https://www.spooky2academy.com/courses/all-courses/. Hope this helps. I’m very sorry for your feedback about the emails that have not been answered, I’ll get back to our customer service team about your situation and please be sure that they’ll do their best to help you solve your problem. You can also contact us via live chat. Thanks again for your understanding and support.

  16. Greetings! Just to make sure, can one be in their home while running mold fungus programs?

    1. Hi Myrande, we suggest that you leave your room when you remove mold at home. Any questions, feel free to contact us.

  17. I started the programs on remote a week ago when I left to travel. 😉 Now, I have a couple of questions …
    How do I know that the mold is dead? Will it disappear? I will no longer see the black? Or will the black still be there and be dead? How long should the process take?
    Thank you!

    1. Hi Sherrie, the environment is different in every place, so we can’t give an exact amount of time needed for treatment. You can check out the positive reviews from our customers about mold here: https://www.spooky2reviews.com/?s=mold that might be able to give you some help. Thank you for your understanding and support.

  18. Does this frequency treat mycotoxins?

    Stuart Janousky
    1. Hello Stuart, mycotoxins are fungal metabolites and there are good ones (some are therapeutic or beneficial) and bad ones (like Aflatoxin) but they are basically a fungus, or a secondary fungus mutated from the original. When you are running the detox preset above, mycotoxins may be remove because it will remove toxins throughout the body. If you would like to treat mycotoxins directly, you could search “mycotoxin” in the Programs tab, you will find many related programs.

Leave a Reply

Your email address will not be published. Required fields are marked *