Q: I can't feel anything in contact mode. Is this normal?
A: Yes it is. The electrical pulse is 320v, which is very high, but the duration of the pulse is extremely short. The pulse lasts about half a millionth of a second. This stresses the cell walls and assists the plasma.

Q: Why does my generator stop responding when I use it with Spooky Central? I am using a USB filter cable.
A: High power & high frequency signals are emitted from Spooky Central. These are affecting your generator. The USB filter cable and high quality Spooky Central BNC cables prevent most of the frequencies from entering the generator. However, the generator's body is made from metal, and this is picking up frequencies from the white high voltage cable and the tube. Please have the white high voltage wires and plasma tube as far from your generator as possible.

Q: Can you get me a power vs. distance vs. frequency curve for the plasma tube?  Your claim is it is more powerful than the other units but only works to about 2 cm. I successfully used the GB4000 MOPA at about 2 meters.
A: I am not sure who gave you this information. Our unit works much further than 2cm! We could detect a strong signal 60m away through concrete walls. The tube has about 40 watts applied. All of this power is used to treat the pathogen, not provide a carrier that has no function apart from lighting the tube and causing frequency fatigue. Beyond a few cm the field of all plasma devices changes from near field to far field. The near field is more effective. This is why we recommend having the tube close or even touching.

Q: What is the frequency range of Spooky Central?
A: The plasma tubes generally ionise at 80 kHz but we allow a margin for tube manufacturing variables and different operating ambient temperatures. Spooky Central will actually work down to 0Hz but the tube ionisation is so brief that it cannot be detected. The maximum frequency is about 3.6 MHz, but again this depends on many factors like the length, spacing and orientation of the white wires feeding the tube, tube type and more. Adding a high speed gate (about 20 Hz) increases the operation range. We have run a Spooky Central at 8 MHz using a short wire and 20 Hz gating.

Q: What makes you say the near field is more effective?
A: That is the field type used by doctors when they used the original Rife machines. They found that beyond several feet the results were not so good. The signals can still be detected but the field starts turning into far field. Plasma produces two related fields. The one that does the really heavy lifting is the near-field, and this extends six inches from the tube in all directions. After six inches, it becomes far-field, which isn't as effective as near-field, although it still works efficiently enough to disinfect and clear mold from a home. So it still works on the body, just not to the same extent and power as near-field.

Q: If running a Spectrum sweep will there be limitations on the maximum WCM values that will be used with the plasma portion of Spooky Central?  I'm wondering how well the amplifier will be able to amplify the many simultaneous frequencies that are produced by the spectrum sweeps in order to ensure EACH frequency has enough amplitude to be effective via the plasma.
A: We have run many spectrum sweeps in Spooky Central. We found that the amplitude of each spectrum frequency is high. Most digital spectrum analyzers do not pick up the frequencies since they use a bin sampling method but the waveform wavelengths conform exactly to the set parameters of the Spectrum. Having said all this, we have noticed (for our tests anyway) that a low wave cycle multiplier seems most beneficial for rapid results to be seen. The BXBY waveform, which is actually a custom Spectrum with a wave cycle multiplier of 2 has particularly strong signal at both frequencies since the WCM is 2. Most plasma Rife machines waste power at the carrier frequency. Only 2% of the total power to the plasma tube hits the target when using their recommended settings for cancer. Though our unit is only 40 watts, it does apply a true 40 watts at the target frequency.

We have tried not to compare our unit to any other commercial device, but many people seem to think more watts is better. Much as you asked the effective distance of our tube. Royal Rife and subsequent doctors touched his patients with his phanotron tube whilst treating them. His machine sent around 45 watts to the tube. We have modeled our machine around his.

Q: Is the plasma tube powerful enough to treat all the body or just parts?
A: The plasma tube is powerful enough to treat the whole body, though to gain the most benefit from the frequencies we suggest you treat portions of your body at a time, or sweep the tube across your body.

Q: Is the plasma tube UV shielded? I'm treating important pathologies in the area of the eyes, and need to know that no harmful UV radiation is coming out of there.
A: Quartz glass is transparent to ultraviolet light, and emits large amounts of ozone and UV light as a result. Our plasma tubes do not contain poisonous Mercury and therefore emit very little ultraviolet light.

Q: Is it possible to attach other plasma tubes from other companies?
A: Plasma tubes from other companies should work with Spooky Central provided they have internal electrodes and the ionising voltage is not too high. The TrueRife machines are simple car coil devices that operate at extremely high voltages. It is possible these tubes will not work with Spooky Central.

Q: It is my understanding from your prior reports, that this plasma tube has the ability to simultaneously emit dozens of frequencies at the same time, rather than sequential frequency emission, one by one, as is the current limitation when just using the hand bars, or the foot plates, etc…..
A: Spooky Central can run a plasma tube with the Spectrum waveform. This waveform can contain many equidistant frequencies that are simultaneously broadcast. Further details of Spectrum are in the Spooky User's Guide.

Q: What is the gauss power of the PEMF coils on surface and what is the Hz range that the coils cover? Would you say it is just good as the most expensive ones on the market?
A: The coil output of Spooky Central is a short spike as opposed to long duration signals, so it cannot be compared to other systems. The coils are rated at 200 gauss but the field strength may be higher. We are currently investigating the use of more powerful coils. The frequency is a fixed 100 Hz and the pulse duration 69 microseconds.

Q: Apart from precautionary measure of not using PEMF for those with pacemakers, I have read that it should not be used with patients who have metal vascular clips.  These clips hold blood vessels intact and the force of the magnet may pull these clips and misalign the blood vessels or even rupture them.  Please keep this in mind.
A: Most vascular clips are ok for use with MRI scanners that are much more powerful than Spooky Central's coil output since they are made from metals or materials that are not magnetic. Some clips are made from ferrous materials. If you have these then our advice is to avoid MRI scans and PEMF use unless instructed to do so by a trained and registered medical professional.

Q: Where is the best place to set up Spooky Central? Can I set it up in an open area like our living room which flows to kitchen and dining room? I told my husband to set it up in our bedroom. I hope the metal lampshades will not affect it or vice versa. Can sparks jump to the metal?
A: Spooky Central can be safely used in almost every room, except rooms that are damp such as the bathroom or laundry. Sparks will not jump from nearby metal objects. The bedroom is an ideal place to position Spooky Central since overnight treatments will then be possible.

Q: What is the max time I can use the plasma continuously?
A: There is no maximum time. It can be used overnight, though we suggest shorter day treatments. This allows you to monitor your own health condition whilst using Spooky Central.

Q: Why does my Spooky Central no longer light the tube?
A: There can be many reasons. The most simple solution is to ensure the white cables is kept apart and there are no loops in the cable. Software settings can also cause problems. We suggest using the Spooky Central presets to guarantee best results.

Q: Why can't I hear the ultrasonic speaker when I run the generator at 3000 Hz?
A: The ultrasonic speaker runs at a slower frequency than the generator input. The input frequency is divided by 16 for high speed operation and 256 for low speed operation. At high speed setting an input of 3000 Hz will make the ultrasonic speaker run at 187.5 Hz. You will hardly hear it. To make the ultrasonic speaker run at 3000 Hz set the generator frequency to 3000 x 16 = 48000 Hz.

Q: I cannot seem to get the central contact mode to work. What's more interesting is the only way to get response via contact mode through the central is when I plug into the coils out (NOT the contact out)!!!
A: It is perfectly normal that you don't feel anything. Spooky Central works entirely differently from any other contact device. An immensely powerful 320v (or more) is fired out for less than half of a millionth of a second. If the duration was a second it would throw you across the room! This extremely short, intense voltage is devastating for viruses, bacteria and parasites, but harmless for us since the pulse is so brief.

Q: How does one apply the BXBY frequency set of 7829.37.42 using Plasma mode? Do we still use the Spooky Central preset? The original BXBY settings used the BXBY waveform.
A: The BXBY waveform did not meet expectations and has been discontinued. Please use the JW - Spooky Central Cancer presets instead.

Q: How about Charlene Boehm's (cpsResearch LLC DNA Frequencies) frequencies too, same Spooky Central preset?
A: Yes. Select the JW - cpsResearch LLC DNA Frequencies preset. The preset will ensure that frequencies are only output to SC in the plasma's working range, so Char's frequencies would be automatically translated.

Q: The tube does not light, how do I check whether it is the tube or machine problem?
A: Search for "1604000" in the database. Run this frequency using the JW - Spooky Central preset but set Out 2 = Out 1 x 0 + 2000 Hz. Tune an AM radio to 1604000 Hz and hold it near the high voltage wires of the tube. You should hear a strong tone from the radio.

Q: The modulation light does not go on sometimes or it stops while a freq is being broadcast. Once the light goes out the plasma tube stops flashing but stays lit. I am setting up the gen and switching on before loading the software. When I go to stop the program the gen does not stop till I unload the program and load it again. Then it switches off. Please advise thanks. All wiring is correct.
A: Electrical noise may be causing the problem. Make sure the white high voltage wires and plasma tube are as far from the generator as possible. Use the special USB and BNC filter cables provided with your Spooky Central. If you do not have the BNC filter cables these can be obtained from spooky2-mall.com.

Q: I have Spooky installed, but cannot see a JW - Spooky Central preset. I do have a Spooky Plasma preset. Can I use this?
A: No. This may damage Spooky Central. Please install the latest version of Spooky from spooky2.com. The file is updated each month with the latest presets already loaded.

Q: Running cancer, or any, treatment it is skipping up to 5 frequencies at a time. A 30 minute treatment stops in 6 minutes. Is this normal? I have never seen frequencies skipped before.
A: Please check that the frequencies are not entered into the Blacklist in the Advanced Menu and the "Skip Concurrent Duplicate Frequencies" option is not selected.

Q: Is SC good for a specific cancer which is not in the database.
A: We suggest using the generic presets for Cancer since they do not take long, the frequencies are already loaded, and target most cancers.

Q: With the new Feb 1st Spooky Software download there is a new preset called Spooky Central Low frequencies...Does this mean that we can now run healing frequencies on the Spooky Central if we choose this preset?
A: Yes, but his is only for people who have Spooky Central.

Q: Can the Spooky CENTRAL plasma tube version do multiple simultaneous frequencies?
A: Spooky2 does have a way with Spooky Central/Plasma to run multiple frequencies at once. This is in the context of a Spectrum Sweep. You specify a range of frequencies you want the sweep to run, and the number of simultaneous frequencies you want to be sweeping that range. You can specify 100 frequencies, or even more, but what happens is the power of the plasma is divided by each of the frequencies you choose to simultaneously use. So if you choose 100 frequencies, each one will be 1/100th the strength of a sweep with just 1 frequency at a time.

What Spooky Central cannot do is to run 8 specific frequencies simultaneously with 1 XM generator. You can run 2 frequencies—one out of Out1 and one out of Out2. Like with the Spectrum sweep, the power is divided by the number of simultaneous frequencies, in this case Multiple frequency hits like other Rife machines claim aren't delivering the power in a focused manner.

Q: Can we use the Spooky Central for healing/detox frequencies as long as the Low Frequency preset is selected?
A: Yes, you can. Spooky Central turns the low frequency into a beat frequency mixing 2 higher frequencies. And the high frequency component ensures total signal penetration because it acts as a dynamic carrier.
For more details, please check:
http://www.spooky2.com/forums/viewtopic.php?f=74&t=4553