Dark Light

All You Need to Know About Remote Mode 25

Share this:

We all know that being healthy is necessary, but pathogens can always get to us when unguarded. You may be troubled by these problems sometimes in your life:

  • You are too busy at work and have no time to look after your health problems.
  • Your parents and friends are unwell, but they are too far away, or you cannot take care of them.
  • Your son is addicted to smoking, and you would like to help him quit smoking.
  • You want to purchase a health device, but you do not want to be trapped in wires.
  • Your lovely pet is sick, and you cannot find a vet for her.

Now we have great news for you: Spooky2 Remote can save you from all the problems listed above and help you and your family stay healthy and strong!

What is the theory behind Spooky2 Remote?

Spooky2 Remote allows people to get treatments at any distance using the recipient’s DNA. The theory behind Spooky2 Remote is called “Quantum Entanglement”, which was mentioned as “Spooky action at a distance” by Einstein. The basic idea is that there are situations where two particles act as though they were connected, when in fact, they are at different locations, sometimes miles apart.

Experiments showed that when two photons were created at the same time and then separated from each other, something done to one of them would have an instantaneous effect on the other one. That is, there would be no time delay.

Now with the help of Spooky2 Remote, you can enjoy the benefit of Spooky2 energy balance programs at any time, anywhere as long as the power supply is stable.

How do you run Terrain Protocol using Spooky2 Remote?

At Spooky2, we always recommend our users to run the Terrain Protocol Preset for detoxification before starting their Rife frequency treatment. When all the toxins are accumulated in your body system, Rife frequency energy cannot pass through your cells and organs effectively. Therefore, we recommend running the Terrain Protocol Preset to prepare your body for Rife treatment programs.

Since Terrain is an 11-day, non-stop preset, it is more convenient when running the protocol using your Spooky2 Remote.

So, how exactly can you use Remote to run the protocol?

Once you connect Remote, the Spooky2 generator (both GX and XM are fine) and your laptop, open your Spooky2 software.

First, under the Presets tab, click Detox.

Then, since you are using Remote, select Remote as your treatment mode.

Next, choose between the three types of Terrain Protocol. Here, we choose the Terrain (R) – BY as an example. Double Click the preset and then go to the Control tab.

Under the Control tab, click “Overwrite Generator” and select the corresponding frequency output. Finally, you may click to start the preset. The preset will run for 11 days and switch between different programs automatically.

Tips on using Spooky2 Remote to run Terrain Protocol

Since the protocol requires 11 days of stable connection, unexpected shutdowns may sometimes occur. So what should you do when it happens?

It is always important to note which day you are on when running the Terrain Protocol so that you can start from the step you were at before.

For example, if your protocol stopped on Day 5, check the list below to find out which preset was running before it stopped.

Preset 1, Day 1 – 1. Remove Metals
Preset 2, Day 2 – 2. Remove Metals
Preset 3, Day 3 – 3. Remove Chemical Materials
Preset 4, Day 4 – 4. Remove Systemic Toxins 1
Preset 5, Day 5 – 5. Remove Systemic Toxins 2
Preset 6, Day 6 – 6.1 Remove Intestinal Toxins
Preset 7, Day 6 – 6.2 Remove Systemic Toxins 3
Preset 8, Day 7 – 7. Parasites and Liver Function
Preset 9, Day 8 – 8. Kidney Function 1
Preset 10, Day 9 – 9.1 Kidney Function 2
Preset 11, Day 9 – 9.2 Cleanse Blood
Preset 12, Day 10 – 10.1 Kidney and Liver Toxins
Preset 13, Day 10 – 10.2 Intestinal Parasites
Preset 14, Day 11 – 11.1 Lymphatic System 1
Preset 15, Day 11 – 11.2 Lymphatic System 2

You can see that on day 5, you should be running Preset 5.

Now, head over to the Control tab in the Spooky2 software and enter the preset number into the Preset field located just below Dwell and Step.

After updating the Preset number, double click on another field (such as Step) so that the update takes place. You should now see the preset name on the top right box.

Can different people share the same Remote?

If you are running the same program/preset on different people, you may place all the DNA samples in the same Remote and run the frequencies. Just make sure that the samples are separated using labelled (with names) tapes to ensure a better therapeutic effect.

If you are running different programs/presets on different people, you will have to run the programs successively.

Therefore, we always recommend our customers to have multiple generators at home for their various health needs.

For more, you can also read this blog: Why Do We Recommend Using Multiple Generators?

Share this:


  1. Do you wear any kind of signal-receiving device during the 11 days of the Terrain protocol?

    1. Hi, no need for any kind signal-receiving device.

  2. so how many miles can you be away from the generator while the detox is running for it to be effective.

    1. For remote mode, you can go anywhere you want!

  3. Hi,
    As a new user, as far as I can see you recommend that I run the 11 day terrain protocol before anything else as described above.
    Can I clarify a few things:
    1. Will the program will run for 11 days continuously? Therefore requiring the unit and connected PC to be powered up all the time.
    2. Will distance from the unit matter? i.e. provided that I have a DNA sample in the remote unit, it will not matter how close or far I am from the unit whilst this program is running.
    3. Can I run the terrain protocol for two people at the same time, using the two generators of the Generator X and two remote modules?
    4. Is it possible to load the 11 day terrain protocol onto the Generator X so that you do not need to keep it connected to your PC ?

    1. Hi,
      1. If you choose remote mode to run terrain protocol, this program will run for 11 days continuously. But for contact or other modes, every preset will only run for a few hours everyday and then stop automatically. So you need to manually start the next preset everyday. So we recommend you use remote mode to run terrain protocol to save many troubles.
      2. For remote mode, distance will not be a problem, you can go anywhere you want.
      3. Of course you can!
      4. Yes, you can load terrain protocol into your GX and then run without a computer, the steps are: https://www.spooky2-mall.com/blog/how-to-load-and-run-terrain-protocol-using-generatorx/
      Any questions, please feel free to let us know. You are welcome to send them to [email protected].

      1. Thank you for your comprehensive reply

  4. do I need to have the remote in a certain port. Because I am trying to run the detox lymphs but when I check the system it says port 1 configured for plasma

    1. Hi, no need to put remote in a fixed port. But if you want, you can do this for your convenience:)

  5. I am still confused about choosing the correct Generator. With Generator X where there is two in one it shows on my Software in the small pink blocks a “3” and “4” – but on the Generator it self there is G1 (Port 4) and G2 (Port 3)
    Does that mean the Port shows the “3” or “4” on the software.

    1. Hi, yes, you are right. G1 (Port 4) corresponds to “4” on the software and G2 (Port 3) is to “3” on your software. You can know more details from this blog: https://www.spooky2-mall.com/blog/how-to-identify-the-correct-port-number-in-spooky2-software/
      Any questions, please feel free to send them to [email protected], our support team is willing to help you at any time:)

  6. To address possible fleas on dog or cat, remote seems to be the way to go. Do I need to change any settings on Anything? Do I need to run a terrain on both dog and cat? Should I be running a BFB, if so, tens pads won’t work. Remote with nail clippings for BFB?
    Not sure the best way to address this issue. Also, would either tube, (central i assume) be useful to run in my bedroom where all, including myself, sleep?
    I am a beginner, in case you haven’t figured that out and any help is most appreciated. I have been running a few programs on myself using the tens pads for BFB and then adding a few programs to the scan results….HUGE success!!
    Thank you, in advance!

    1. Hi, you do not need to change any settings. If you want to run terrain on your pets, you can choose the low-power terrain.
      Yes, for pets, we better recommend using remote sample scans on them to get rid of limits on their activities.
      Plasma has an effective healing distance of six feet. So anyone staying at this distance will receive the full treatment.
      If you have any questions during use, please feel free to send them to [email protected], our support team is willing to help you at any time:)

  7. How do we know this is working?
    Like for example it says “we should see the led’s light up on the remote”.
    My led’s have not once lit up.
    Is there a video to show you how this really works?
    I have no confidence in any of the manuals that I’ve seen so far as they deal with big problems but fail to even give an example of how to simply make this work.

    1. Hi, Joe. See more details from this video: https://www.youtube.com/watch?v=uB8Nc02d3Ds
      If your remote light is always off, it seems to be abnormal. Please feel free to send your questions to [email protected], our support team will help you have a further check and reply to you ASAP:)

  8. My husband, age 66, had 3 covid jabs followed by Omicron. He was admitted to hospital with spiking temps, chest pain with EKG/ECG changes, and respiratory distress. The doctors said he did not have a heart attack, discharged him on Day 5, with no follow up other than antibiotic therapy lasting for about 4 weeks. He is home, ambulatory and remains short of breath with activities.

    I have the following: GenX, Spooky 2 transmitter and receiver, spooky remotes, spooky boosts. Should hook him up to remote terrain/detox for 11 days before Covid Programs? Should I use remote with Spooky Boost? Your advice is greatly appreciated.

    Susan Rubidge
    1. Yes, Spooky2 Remote should be connected to the BN port of Spooky2 Boost to receive the best treatment effects.
      Any questions, please feel free to send your questions to [email protected], our support team will help you have a further check and give you much more professional advice based on your conditions:)

  9. Hi, can I use the Remote treatment mode on Programs I have selected for my personal Preset? Example – can a selected program (Heart muscle (XTRA) be applied via the Remote (DNA) Mode? It looks like it does but, I haven’t read about this type of use. Thank you for your reply.

    1. Dear Mike, of course you can do this. Here is the steps: go to preset tab and choose shell empty presets, then choose the mode you want to use: Remote, choose the preset like killing/healing, go to program tab and use the keyword to search the programs like Heart muscle, go to control tab, click overwrite generator, choose generator number, last click start. Hope it helps.

  10. Hi, can I run more than one preset/program on the same person DNA sample at the same time? I appreciate separate ports are required.. Is there any reason why this should not be done or, is it safe?

    1. Dear Mike, if you want to run different programs at the same time, you need to use multiple generators. Besides, a single generator can run one preset except you can chain presets to run one after the other. While using Spooky2, you can make adjustments based on your body’s response. If you have more questions, please feel free to contact us by email: [email protected]. Hope this suggestion may help you!

  11. Can you run a preset or program and the maintenance detox on the same remote?

    1. Dear friend, no, you cannot run different programs in the same Remote at the same time. Any questions, feel free to contcat us via email: [email protected].

  12. Hi if i have my spooky 2 in my basement where i have No signal on my Phone. Does this affect The signal on The remote device?

    1. Dear Jonny, please don’t worry Remote uses the principle of quantum entanglement, just make sure the machine can run properly then it won’t affect the effectiveness of Remote. Any questions, feel free to contact us via email: [email protected].

Leave a Reply

Your email address will not be published.