1. What Is Spooky2 Biofeedback?
Biofeedback is a way of listening to your body, and discovering what frequencies are best suited for you. During biofeedback scan, you will receive a type of signals (frequencies, scalar field). Moreover, biological reactions (heart rates and electronic signals) to signals are carefully monitored during a biofeedback.
2. What Does Spooky2 Biofeedback Do and Not Do？
- Measures how microorganisms react to frequencies.
- Provides the top 10 frequencies that responded
- Allows you to save and name that list
- It doesn’t identify conditions that are not caused by harmful microorganisms like:lack of vitamins, functions of organs
3. Types of Spooky2 Biofeedback
3.1 Spooky2 GeneratorXTens Biofeedback Scan
The GX’s clever circuit design allows it to both transmit frequencies and accurately monitor body signals. One GX can complete a Biofeedback Scan.
3.2 Spooky2 GeneratorX Sample Digitizer Scan
Sample Digitizer is an accessory for GX biofeedback scanning. The biological sample is placed in the plate, and GeneratorX scans the sample to find the frequency of pathogens in the sample.
3.3 Spooky2 Pulse Scan
The pulse uses the heart rate to monitor the body’s response to that frequency. Under ideal conditions, the only variable of change should be the frequency, but this is not the case. Most individual’s heart rate changes with normal body movements. Thus, when you do a pulse scan, you should try to keep your body still so that you can get more accurate results.
3.4 Spooky2 Scalar Digitizer Biofeedback Scan
Spooky2 Scalar is the only Scalar device that can perform a biofeedback scan. Spooky2 Scalar Digitizer measures the tiny changes in the scalar field during a scalar frequency scan. Scalar biofeedback requires the use of two signal sources. A GX/GX Pro is required because the GX/GX Pro is two generators in one. The G2 modulates the scalar field and the G1 measures the response.
4. Steps to do Spooky2 Biofeedback Scan
Here are software steps about how to do biofeedback scan.
1.Click on the control tab
2.Click on the GX generators you will use for the scan
3.Click stop
4.Attach tens pad to area to be scanned
5.Attach the cable directly to the Out1 port of the generator( You will not be using the boost for scanning)
6.Click on the preset tab
7.Click on Biofeedback
8.Select GeneratorX
9.Select GX General Feedback Scan(C)-JW
10.Select control tab
11.Select overwrite generator
12.Select the generator you want to run on
13.Click on scan
14.The scan takes about 19 minutes in the January 2024 software
15. When the scan is done, it will display the top 10 frequencies that responded
16. Click on the save icon
17. Type in a name then click on the save icon
5. How to Use Biofeedback Scan Data
1.Click on the control tab
2.Click on the generator you wish to use for treatment and click on stop(you can use either XM or GX there is no difference in treatment)
3.Click on the preset tab
4.Click on the green home icon
5.Click on Shell(Empty) presets
6.Click on the delivery method( in this example click on Remote)
7.Click on Killing (R)-JW(Always use killing when using a biofeedback scan)
8.Click on the program tab
9.Search on BFB
10.Click on the BFB program you created
11.Click on the PLUSE button underneath the BFB program list
12.Click on the control tab
13.Click overwrite generator box
14.Click on the generator you want to run on
15.Click on start
I am starting three people through remote with fingernail DNA from each of the three doing the 11 day Terrain. Can I begin the Baseline and BioFeedback for each by pausing the Terrain then after each is done resume the Terrain?
Thank you for your question.
Yes, you can start the Baseline and Biofeedback scans for each person by pausing the Terrain program. After completing the Baseline and Biofeedback for each individual, you can resume the Terrain program. This approach allows you to manage multiple scans efficiently while continuing the Terrain protocol.
If you have any more questions or need further assistance, feel free to ask!
I am using GEN.X remote for chlesterol level ,averting sims working good, but there are no lights or flickering lights on remote. How I know that the remote is working. When I using remote an 2 channel signal generator, lights on remote are always on or flickering.
Thank you for your question.
When using the GeneratorX Remote, it’s normal for the lights on the Remote to not flicker or light up as much, especially with certain programs like the one for cholesterol. The lights on the Remote are not always a reliable indicator of function. The GeneratorX operates at a higher speed, so the lack of flickering doesn’t necessarily mean the Remote isn’t working.
To confirm that the Remote is functioning, ensure that:
The generator is running the program correctly.
The connections are secure.
You see the progress in the software, which indicates the program is active.
If everything is running smoothly in the software, the Remote is likely working as intended.
If you have further questions, feel free to ask!
Hi there, I just performed our first ever GenX BioFeedback scan via Baseline. We followed the step by step guidance as per videos and the Biofeedback for beginners here. It took 20 mins pretty much as expected. LOTS of hits, but it brought up no results. Any ideas are most welcome, please. I took a screen shot but i cannot paste it here. I have put it into Spooky2 Facebook, but my post is pending still. Thank you.
Thank you for reaching out, and congratulations on completing your first Biofeedback scan! It’s great to hear that you followed the step-by-step guide. If no results were shown despite having lots of hits, there are a few things you can check:
Check Your Generator’s Settings: Ensure that your GenX generator is properly connected and configured. Sometimes, incorrect settings can lead to incomplete results. You can try rerunning the scan and double-check all settings, especially those related to signal transmission.
Review the Data: It’s possible that the hits were detected, but the results were not displayed due to a glitch or software delay. Try reviewing the Biofeedback scan data directly by clicking on the “Biofeedback Results” tab in the software.
Software Update: Ensure your Spooky2 software is up-to-date. Updates often include bug fixes and improved functionality, which might resolve issues with displaying scan results.
Use Different Presets: If you’re still having trouble, try running another type of Biofeedback scan (e.g., a Grade Scan) to compare the results.
Since you’ve already posted in the Spooky2 Facebook group, you should get feedback from other users once your post is approved. In the meantime, feel free to ask here if you need more help!
Thank you for your reply. For others assistance:
We used the Baseline scan which we thought would also perform a normal scan after but it does not, hence no results. If we want to do the baseline first with the scan to auto follow, we need to tick the box next to that box. As these are the subject of continual development, the videos we watch are not always to be taken as step by step guides!
Thank you for your follow-up! You’re absolutely right—Baseline scans are a bit different as they don’t perform a regular scan afterward. To do both, you’ll need to tick the box that allows the normal scan to follow after the Baseline scan.
As you mentioned, Spooky2 software is constantly evolving, so videos and guides might not always reflect the latest updates. It’s always a good idea to stay updated with the latest software developments and check the settings carefully before each scan.
If you have any other questions or need further assistance, feel free to reach out!
When I go to start a Biofeedback scan I get a massage that tells me that I am in” test mode” and the results of my scan will be invalid.
How do I get out of “Test mode”
Thank you for your question!
The message you’re seeing about being in “Test Mode” typically indicates that the biofeedback scan is set to run in simulation mode, rather than performing a live scan. To resolve this and exit “Test Mode,” follow these steps:
Check your hardware connection: Ensure that all cables and equipment, including your generator and biofeedback accessories, are properly connected. Sometimes, the system might default to Test Mode if it doesn’t detect the hardware.
Exit Test Mode in the software: In the Spooky2 software, go to the Control tab and make sure you are connected to the correct generator. Click the generator number to ensure the software recognizes it.
Restart the software: If the above steps don’t work, try closing and reopening the Spooky2 software to reset the connection and settings.
These steps should help you get out of Test Mode and run a valid biofeedback scan. If you still encounter issues, feel free to reach out for further assistance.
On the Biofeedback one method listed is the Generator X with Sample digitizer. Could the remote be used instead?
Dear Viacheslav,
Thank you for reaching out!
The Sample Digitizer is designed for biofeedback scans with GeneratorX, allowing real-time analysis from a sample. Remote mode, however, is not suitable for performing biofeedback scans, as it does not provide the necessary biological feedback for accurate results.
If you’re interested in exploring effective biofeedback method, you may find scalar biofeedback scanning helpful. It offers a non-contact way to detect imbalances in the body. You can learn more about it in this blog: Unlock the Healing Power of Scalar Biofeedback Scanning for Better Health(https://www.spooky2-mall.com/blog/unlock-the-healing-power-of-scalar-biofeedback-scanning-for-better-health/).
Let us know if you have any questions!
Best regards,
Spooky2 Team
I have tried several times to do a Scalar biofeedback. Everything seems to be working, I can see the graphics changing and lights flashing at intermittant times but it does not stop even after 1 hour. Am I doing something wrong. Also I am not sure what to do with the report if and when I get one. I was using the Hunt and Kill because I have a bacterial infection at present.
Hi Tilly, thanks for your question! The Hunt and Kill preset doesn’t stop on its own—it runs continuously until no more hits are found or you manually stop it. So it’s completely normal for it to keep running even after an hour.
A few tips:
1. Be patient—this scan can take a while, especially for bacterial infections.
2. You can stop it manually if needed, but it’s best to let it run as long as possible for better results.
3. Make sure your software and device are up to date to avoid any issues.
Once the scan ends, you can go to the **Biofeedback Results** section in the software to view the detected frequencies. These are the ones you can run as a treatment set afterward.
Here’s a helpful guide on how to use the scan results:
👉 [What to Do with Spooky2 Biofeedback Scan Results](https://www.spooky2-mall.com/blog/what-to-do-with-spooky2-biofeedback-scan-results/)
And of course, if you need one-on-one help, feel free to email us at support@spooky2-mall.comanytime! 😊