Peptide programs are a cutting-edge development in frequency therapy, developed under the leadership of John White, founder of Spooky2, and his dedicated research team. These presets have been over eight years in the making, shaped by extensive research and community input. They focus on healing at the molecular and cellular level, with hundreds of peptide frequencies designed to address specific biological pathways.
Unlike traditional frequency sets, peptide programs are highly targeted. Each preset is crafted using specific peptides that help regulate the body’s vital functions. For example, some presets focus on reducing inflammation or modulating the immune system by targeting pathways like TNF-α or TGF-β1.
Frequently Asked Questions About Peptide Programs
1. What is the difference between running peptide frequencies and running main database frequencies at the same time?
They are completely different. Main database frequencies for remotes are usually continuous tones lasting about three minutes each. Peptide frequencies are very short bursts, often a quarter-second to one second long.
2. In this case for Spooky2 users, if they want to run different programs they can chain it?
Yes, you can. An advantage of peptide programs is their short duration. They do not require extensive repetition, though you can choose to repeat them if desired.
3. How long does it take to see effects from a peptide program?
The pioneer of peptide frequencies, Joel Sternheimer, used short audio snippets for plants, playing them a few times daily for 5-10 minutes total. In our testing, some users report effects within minutes. The key is precision. If your body needs and can utilize the specific peptide, results can be very fast. If you run a program for a condition you don’t have, you likely won’t see an effect.
4. How long can we run a peptide program maximum? Does it have any side effect if we run it for very long?
There is no specified maximum. John White personally runs a “Young Body” program continuously, 24/7, including while sleeping, with no sleep disturbance and positive effects. The approach is proactive wellness maintenance.
Additional clarification:
-
“Young Body” is a program available on Aha Halo.
-
On Spooky2, similar supportive options include “Anti-aging” and “Longevity” within the peptide presets.
5. How to update only the peptide presets without a full software update?
Visit spooky2.com, go to the Downloads section, and use the dedicated peptide presets installer. You can run this installer without stopping your Spooky2 system. After installation, the new presets will appear under the “JW Peptides” tab in your software.
6. Can I update presets if my software is from 2019?
No. The 2019 software version is too old to update peptide programs. Direct preset updates require software from February 2022 or later.
7. Why can’t peptide programs be imprinted onto water or stickers?
The precise sequence and timing of the frequencies are crucial. Imprinting broadcasts all frequencies simultaneously, not in the required sequence. This prevents the proper construction of the intended protein in the body.
8. What Spooky2 equipment is needed to run peptide programs?
The XM, GeneratorX (GX), and GeneratorX Pro (GX Pro) models can all run peptide programs. Presets are configured for easy use with these generators, including remote,contact,plasma, scalar and coil modalities.
9. Can Herxheimer reactions occur with peptide programs?
Herxheimer reactions are typically caused by toxin release from dying pathogens. Peptide programs work differently. They support optimal body function. Dizziness or disorientation some users report is likely due to the body adjusting to improved function, not toxin release.
10. Are Terrain and Detox programs still needed when using peptides?
They are not strictly necessary for preventing a Herxheimer reaction from peptides, as peptides do not work by killing pathogens. However, general detoxification is always beneficial in our toxic environment. Peptide-based detox programs are also available.
11. Is there a maximum recommended duration for looping peptide presets in remote mode?
No. You can run them for as long as you wish.
12. Can the body develop resistance to frequent peptide exposure?
No. Peptide programs act like natural proteins your body needs. They are not drugs, so tolerance or reduced effect over time is not expected.
13. For ongoing support, is daily use or intermittent use better?
For chronic conditions, regular daily use is recommended. Do not wait for symptoms to worsen again. Consistency helps achieve complete wellness, similar to completing a full course of antibiotics to ensure all targeted issues are resolved.
14. Are human peptide programs different from animal ones? And can peptide programs designed for humans be used directly on animals?
Yes, there are indeed significant similarities between human and animal biology at the cellular and protein levels, which allows for the application of human peptide programs to animals in practice. As a fundamental principle, a protein’s function is largely determined by its structure, not its source. Many critical therapeutic proteins were originally discovered in other species. The main database often directly applies frequencies researched for humans to animals.
15. Can the Microgen device run peptide programs?
No. The Microgen was designed with a minimum frequency duration of 3 seconds, based on typical programs. Most peptide frequencies are shorter than one second, making it incompatible.
16. What might happen if a single peptide preset running is stopped midway for some reason?
Nothing adverse occurs. Testers on our forum have reported similar situations. The treatment simply pauses during the outage and resumes once power returns. It is comparable to a light: you see when it is on, and do not when it is off. The process is straightforward and safe. No harmful effects or side effects result. Peptide designs are segmented and incorporate various motifs inspired by proven models. Therefore, even an incomplete run is acceptable and causes no harm.
17. Someone has stated it is recommended to run peptides on one generator to one person only. Do you agree? More than two people cannot be in the remote for its best effect. Husband and wife share so much DNA, can they share a remote if others can’t?
This recommendation is not only for peptide programs but for all programs. We generally do not recommend too many different individuals using the same remote device. This point is no different from other programs, and its core principle is the suggestion of “one person, one device.” However, if the users live together in the same household, sharing daily life, using common items, and engaging in routine activities together, then there is no issue whatsoever, as family members inherently share each other’s DNA, breathe the same air, and can be said to be in a state of “quantum entanglement.” Therefore, sharing a device under such circumstances is completely acceptable. But if the users are not family members or do not live together, problems may very well arise. In summary, unless the individuals are extremely close, it is best to avoid sharing devices.
18. How have we to consider or with other words how safe is it to use artificially generated peptides and never used it before?
All designs undergo strict review with multiple safety measures in place. We have implemented strong safeguards to prevent any harmful outcomes. Think of it like baking a cake: only wholesome, safe ingredients are included—nothing undesirable is added. Every component in these peptides is selected for safety and benefit.
19. How many peptide programs can be run at the same time?
In our webinar on January 20th, we advised against running multiple Peptide Programs simultaneously. This was a prudent, precautionary recommendation made during the initial launch phase of the program, as we prioritized stability and user experience.
Since then, through continued internal testing and valuable feedback from our user community, we have conducted extensive real-world validation. The results confidently indicate that running the Peptide Program across multiple generators at the same time is not only feasible but also operates without interference or negative interaction between devices.
How to Access the JW Peptides Presets?
Peptide presets are available within the latest Spooky2 software under the JW Peptides tab, making it easy to access and run these powerful tools.
Download
Conclusion
Peptide programs provide a targeted approach to healing, backed by years of research. Whether for specific conditions or overall wellness, these programs offer precision and adaptability. We encourage you to explore the presets, track your results, and share your experiences with the Spooky2 community.
For more information, visit the Peptide Programs FAQ – Part 2 and the peptide program page here. For further questions, feel free to reach out.
Amazing advance John White. So gratefull for all this info
Vidar
Thank you for your kind words. We truly appreciate your support, and we’re grateful to John White for sharing such valuable insights with the community.
I have been told that the GenX cant run peptides only the GenXPro can. The article above says all the generators can run peptides. Is there a reason for the confusion?
Hello Robin, Peptide presets are software-based and are fully supported on all Spooky2 generators, including GenX.
Puedo poner un mismo programa de peptidos, en dos generadores diferentes, para la misma persona?
Gracias por tu pregunta. Normalmente no recomendamos hacerlo, pero puedes intentarlo y observar tus propias reacciones para decidir si continuar de esta manera.
I’m a beginner with spooky2. I received my first XM generator on January 9th. So I still have a lot to learn. This might be a silly question, but is it possible to integrate peptides into a biofeedback scan? Thank you for this amazing technology.
Thanks for your question.
The answer is no — peptides can’t be integrated into a biofeedback scan. Biofeedback can indicate problem areas, but it cannot select the specific peptide sequence needed, as all peptides use variations of the same 20 amino acid frequencies—the sequence is what matters.
Could you do a video tutorial on hardware set up and software instruction in order to run peptide programs with Spooky Scalar please. Thanks
Thank you for the suggestion! We’ve noted it and will put this on our schedule. We appreciate your feedback!
Thank you John White. These peptides are truly a gift to humanity. I have been wanting to do peptides for several years but avoided it because the ones I wanted to do were only available via injections.
Thank you so much for your kind words! We’re really happy these peptide presets made peptide support more accessible for you. It means a lot to us.
Thank for the peptide additions 🙂
What if someone was/is considering specific peptides, for say general category type reasons instead of specific conditions; are there any available programs/presets or plans for running specific peptides? (Example, BPC-157/TB-500, GHK-Cu).
Thanks for your question.
They are included in many of the programs. For example, BPC-157 is in 390 of the peptide programs. There is a custom database called peptide.csv that is include the JW Peptides CSV zip file, described here: https://www.spooky2.com/forums/viewtopic.php?p=205619&fbclid=IwY2xjawPjq_tleHRuA2FlbQIxMABicmlkETFpQVBESTlMQnFLbjN0QkZHc3J0YwZhcHBfaWQQMjIyMDM5MTc4ODIwMDg5MgABHgWkNyfx8FLHWsL8LhH2JZs9aDYPqmjpGuVMBgcfFzdQbHCdBhzPNUbn5Utb_aem_9aNkZzpCV6aWtyZjnC4tRg#p205619
I have been sending frequencies remotely to myself and to my son with my Gen XPro.
He does not live with me. I have a piece of his fingernail in one “clam shell.” and mine in the other.
Please clarify if the statement I saw above,
“,,, do not recommend too many different individuals using the same remote device”
means that I cannot do that?
Thank you!
The Gen Xpro is basically 2 generators in one machine so you are fine in one remote clamshell and your son in the other separate remote clamshell.
John white ❤️🌷
Well John … after this huge upgrade for spooky healing powers, you should consider to upgrade your name too …
Say goodbye to John White … LONG LIVE JOHN LIGHT!!!
Is it possible to create a list of peptide protocols to be performed sequentially? Furthermore, can we run two peptide programs remotely and simultaneously for the same person (I don’t think so).
Thank you for your question!
Regarding your first question, you’re referring to creating a preset chain for peptides, correct? That’s perfectly fine. However, running two peptide presets simultaneously for the same person remotely is not recommended.
Hope this helps!
Thank you very much!
Is it safe to use the Coil directly on the eye while running the Cataract peptide frequencies for better localized treatment?
Yes, it can be used. The eye area is very sensitive; monitor your reactions closely and adjust treatment duration as needed.
Bom dia!
Você já teve resposta na execução das frequências de peptídeos de catarata?
I don’t recall where I heard it but does the GenXPro need to be connected to a computer to run the Peptides?
I’m hoping to connect to my Scalar equipment and it would be much simpler if I didn’t need to also include the computer.
Thank you.
Yes, when running Peptides on the Generator X Pro, the computer does need to remain connected, but you can still connect the output to your Scalar.
Im wanting to run many of the peptides (adding them all to one saved preset chain) thru remote. If they run sequentially is it important to have them in a specific order. I have literally added a lot that are relevant for my health conditions in alphabetic order and saved as a preset chain. Is this recommended? Can the saved preset then be added to normal programs running, before or after? Thanks so much for this amazing update!
Thank you for your question.
Each Peptide preset is designed to work independently, so their effectiveness isn’t dependent on sequence when they’re run one after another in a chain. The saved Peptide chain can also be added alongside normal programs. You can run it before or after other programs without any issues.
Hope this helps!
I enjoy the Peptide Programs and am very grateful for their release, thank you. Since I didn’t know the ‘rules’ I was free to use these remotely with several DNA samples sandwiched in the remote. I asked each person to claim two ‘focused’ programs. (Only I live with the device.) So, eyes for one, back pain for another, dementia for a third, etc. I chained programs together. I began with the nervous center reset, as I am aware if a body is in Sympathetic mode, no benefits will last for long. Within a few hours the person, around 100 miles away reported back relief for the first time in months! Hmmm,,, Seems these programs work without knowing the suggested ‘rules’. I decided to remove back program for 24 hrs. Next day the report was more pain than previous day, but less than they had dealt with in the past. I re-added programs. In my limited 2 week usage, My experience is peptides work, no limitations on miles and in a remote with other DNA samples. Of course there are always exceptions. When running detox glymphatic and frontal lobe dementia over night I woke up ‘dopey’ and brain fogged. The dementia person did too. However, the others didn’t. I decided to include detox support, and stay away from dementia programs for a few days. Just added back in, however not as intense. One of 18 programs and not 1 of 6. Good results today. Again, Thank YOU team WHITE!
Thank you so much for sharing your detailed experience and thoughtful observations. We truly appreciate your feedback and are glad to hear the peptide programs have been supportive for you and others.
Thank you John may you live a long healthy life
Hello!
I’m from Brazil.
If real peptides work best in their injectable versions, could Spooky2 peptides also be delivered via cold laser, placed on the wrist, to transfer them directly into the bloodstream?
This would be done remotely, alternating with two applications via cold laser to increase efficiency.
Congratulations on this new peptide technology. I’m already using it for my kidney stone problems.
Hello! Thank you for your message.
Yes, the Peptide Presets do include a Cold Laser mode, so what you’re describing is absolutely possible.
It’s great to hear you’re already using the peptide programs for your kidney stone support. Wishing you continued progress, and feel free to share updates!
Thank you for all your work.
Where can I download the latest version (03/03/26) of the doc “JW Peptides – John White.pdf”?
I see it in the Spooky2 software but want it as a standalone document.
Thank you!
Please follow these steps on the page where the file is opened:
1. Click the Menu (the three horizontal lines) button to the left of the file name.
2. Select File.
3. Click Save As and choose where you would like to save the file.
Hope this helps!
How can you chain multiple peptides into a chain, I can’t seem to figure it out .
Hi! Thanks for your message. Please check this link https://www.spooky2-mall.com/blog/how-to-chain-jw-peptide-presets-in-spooky2/ for detailed guidance.
New to Spooky2. How many DNA samples from others that live outside my home. Can I put in one remote for the Terrain Detox?
Hi. There’s no strict limit on how many DNA samples you can put in one remote. However, you need to make sure that the program you use is suitable for everyone, and that samples from different people are wrapped up separately. We do not recommend sharing a remote with someone who has critical diseases, or mixing human & animal samples in one remote.
Hi,
Would you be able to add the individual peptides as presets such as BPC-157 or TB500 so that we would be able to mix and match peptides to see what works best? Thank you
Hi Edgar. Thank you very much for your suggestion. However, we don’t currently have a plan for that. We already have some programmed — you can search for names like BPC-157 in the Programs tab.
Hello, where can I find studies or scientific data? I am genuinely interested in researching this technology.
Hi Colin! Thank you for your attention and trust. For more technical details and community insights, you can visit the Spooky2 Forum: https://www.spooky2.com/forums/app.php/portal