You have no items to compare.
Spooky2, is the most highly advanced and versatile Rife system in the world. It's been developed over the past three years by an international team of electronics engineers, technical designers, software developers, and Rife practitioners.
Full support can be found at http://www.spooky2.com.
In April, 2013, the first version of our Rife system – simply called Spooky – was quietly released, with no publicity, and no fanfares. News spread quickly by word of mouth, and thousands of people the world over got their hands on a Rife system that was second to none, equalling and even bettering what most commercial manufacturers had to offer.
But we knew we could do better. A whole lot better. So we took what we learned with Spooky, ripped everything apart, then rebuilt it from the foundations up, not just to be better, but to be the ultimate Rife system.
The result is Spooky2 (the "2" isn't a software version number – it stands for "squared").
And we can say without fear of contradiction that there isn’t a single Rife system on Earth that even comes close.
In order to understand how the Spooky2 Rife system works, let's look at what a Rife machine actually is.
First, you need a frequency generator. Commonly used in many industries, you can buy a superb one for very little outlay indeed.
The second thing you need is a transmission system. This can be simple DC electricity routed to handheld electrodes and footplates – these are called contact or pad machines. Or it can be radio waves, transmitted via an amplifier through a plasma tube or antenna - these are known as plasma machines, unsurprisingly.
A third, and less common, mode of transmission uses the principles of quantum physics and the antenna properties of DNA to transmit through what physicists call nonlocal space. These are remote machines.
Each transmission system has its pros and cons.
Contact pros: effectiveness and speed. Cons: you're wired to a machine, and your hands are tied up holding electrodes, so you can't use these while sleeping.
Plasma pros: Most powerful and original treatment mode Royal Rife used, and can be used hands-free or while sleeping. Cons: you need to remain within 10cm of the plasma tube to get the most powerful near field treatment, noisy cooling fans in many can necessitate earplugs while sleeping, and radio transmission can interfere with household devices.
Remote pros: you don't have to be in the same room as the machine, or even in the same country (no, we're not kidding), so it's hand-free and it can be used while sleeping. Cons: not as fast as contact or plasma, but very effective, and...well, that's it, really.
But the real heart of any Rife machine is the operating system – the software that runs it. In virtually all the machines we’ve collectively owned, this was primitive, clunky, and limited, making the machines a pain to use and program.
The rest is memory chips, a fancy box, some LEDs – and that’s about it.
Five in one
Spooky2 gives you not one, but FIVE Rife machines – remote, contact, plasma, ultrasonic and PEMF – in one package. Here’s how the Spooky2 Rife system works:
You download Spooky2 software here – this is your killer Rife system operating software, and it runs on a Windows PC – even a cheap netbook. It’s yours – free, fast, friendly, easy to use, endlessly programmable, and immensely powerful. You then purchase your own frequency generator.
We’ve found two humdingers, and we helped design one of them. The first costs less than $60, and the second just a shade over $110. Spooky2 was specifically designed to use these machines, and it even installs special software called “drivers” to control them.
Now you can just make a simple DNA Holder if you wish, and you’ll have a superb Rife machine for less than the cost of a cheap zapper.
Not only that, but you can also run up to a massive 127 frequency generators at the same time, all controlled by Spooky2 from a single PC. There isn’t another Rife system on Earth that can do this.
But there’s more. We also designed a brand new infrared biofeedback system called Spooky Pulse, then helped another independent manufacturer to adapt his existing product to use it. Spooky Pulse inputs a frequency sweep into the body to detect all pathogens, pollutants, and parasites present, and you use its results to deal with these problems.
To use it, you’ll also need a set of handheld electrodes. You can buy a commercial set made from industrial-grade stainless steel or copper for about $50. Or you can buy Spooky Tube, a set fabricated from the same surgical stainless steel used to make body implants, making the potential problem of harmful metal ion transfers moot.
Finally, if you need a much more powerful remote transmitter than our cheap and cheerful DNA Holders (and you do), we found a way to boost power immensely by using cheap dual planar coils – we call this unit Spooky Remote. What’s wonderful about it is that we’ve managed to bring remote treatment much closer to the speed of contact or plasma treatment, as well as significantly boosting power and effectiveness.
Put it all together, and now you have the best Rife machine you can buy, offering all three transmission modes, ultrasound diagnostics, and super-powerful scalar transmission.
So what items are needed to start rifing?
1. Most important is the Spooky2 software, freely downloadable here.
2. A Spooky2–5M frequency generator ($114.95).
3. For optimum remote transmission, you'll need a Spooky Remote v1.1 for each generator ($38.00).
4. To quadruple contact power and double remote power for one generator, and to make high quality colloidal silver, you'll need a Spooky Boost 2.0 ($15).
5. For contact transmission, a set of handheld electrodes is required – Spooky Hand Cylinders cost $20.
6. Optional: plasma transmission needs a Spooky Plasma – Spooky Central.
7. Optional: Spooky Pulse biofeedback unit ($58).
Spooky2 has yet another trick up its sleeve that you can't really do with conventional machines – parallel pathogen processing by using multiple generators at the same time.
Working with certain problems like late-stage cancers, Lyme, and Morgellons can benefit from this approach. When multiple organisms are involved, they can form a symbiotic relationship which gives them pathogenic synergy – the whole disease becomes greater than the sum of its parts. They can also share information through a process known as "quorum sensing," and they're able to swap DNA fragments with each other to pass on resistance.
Doing everything in parallel rather than in a conventional linear way addresses these problems. This parallel approach also offers very real advantages for handling cancers.
To make things quicker and easier, we have put together the following kits:
Spooky2 Starter's Kit:
This comes with one generator, two different Spooky Remotes, and all the Spooky accessories. It costs $323.14.
Spooky2 Essential Kit for Cancer, Lyme, and Morgellons:
This comes with two generators, three Spooky Remotes, and all the Spooky accessories. It costs $496.09.
Spooky2 Advanced Kit for Cancer, Lyme, and Morgellons:
This comes with four generators, five Spooky Remotes, and all the Spooky accessories. It costs $841.99.
Spooky2 Colloidal Silver Kit:
This comes with a Spooky Boost 2.0 and two 300mm long 2.5mm diameter certified 99.99% pure silver rods. It costs $43.
There are 3 Spooky2 kits, to find out which kit to choose, please read here.
If your budget is ok, you can also take Spooky Central, which has plasma that can transmit up to 3.5MHz without a carrier. It also has the functions of PEMF, ultrasonic, and augmented Contact Mode capable of true reversible electroporation.