Terrain Protocol is the first step of the Morgellons Protocol. It is helpful and essential for your Spooky2 healing. Not only can Terrain Protocol help you get rid of the toxins of flukes and parasites, but also deeply detoxify to get rid of any heavy metals or other substances.
You can find Terrain Protocol in Spooky2 Preset. It will run for 11 days.
Learn more about the introduction of Terrain Protocol:
https://youtu.be/XGQiqnGlSv4
If you have one generator, there are three ways of running Terrain Protocol:
- Remote mode
- Plasma mode + Remote mode
- Contact mode + Remote mode
This video shows how to run Terrain Protocol BY via Remote mode using one generator:
https://youtu.be/aL92JTHzdmw
This video shows how to run Terrain Protocol BY via Plasma or Contact mode using one generator:
https://youtu.be/B5skPPFLo_4
If you have two generators, there are two ways to run Terrain Protocol:
- Plasma mode + Remote mode
- Contact mode + Remote mode
This video shows how to run Terrain Protocol BY via Plasma or Contact mode using two generators:
https://youtu.be/jPscxQ2YQKI
Among the above running modes, Remote mode is the most convenient way of running Terrain Protocol.
If I run terrain protocol using contact mode (Plasma) on the blue two signal generator (since it is connected to the Central generator which is connected to the plasma tube), and I run the remote mode on the GenX, how do I accomplish this since my computer can only be connected to one of the devices at at time?
Hi, you can connect via a hub and here is link for Spooky2 hub: https://www.spooky2-mall.com/product/spooky2-10-port-usb-3-0-hub/
I just got the the portable essential starter kit so I have 2 xm generators – the output dials came positioned differently. Do I need to position the dials to output 1 or 2 or something else to run the first terrain detox program?
Also, I received the 2 chrome hand cylinders and tens pads with the unit…..
Do I need to run one generator remote and then the other one as set up with one of us wearing a tens pad or holding the hand cylinder for 11 days? Or how do we set it up so 2 of us can go through the detox at the same time with what’s available in the starter kit?
Don’t adjust the xm generator front panel controls unless you know what you’re doing or you’re being guided by tech support. The Spooky2 Rife System is designed to be totally controlled by the software.
If you have pressed the buttons by mistake, restart your generator will solve this
We don’t recommend you run one generator remote and then the other one as set up with one of us wearing a tens pad or holding the hand cylinder for 11 days.Please just choose one of them
How do I know where the knobs on the two generators belong?
I am having a very hard time figuring out what to do after downloading the software. How do I tell which generator is what or does it matter? I really would love a tutorial where I could hear and understand the person talking.
Hi, so sorry to bring you this trouble. l believe these two training courses will help you:
https://www.youtube.com/watch?v=JVr_x77bPuU&list=PLyBlPgYV4wN2B1PbayEo9OX_FzWDiNY9D&index=23&t=1715s
https://www.youtube.com/watch?v=qgnAEFxXAk0&list=PLyBlPgYV4wN2B1PbayEo9OX_FzWDiNY9D&index=21&t=162s
We have plenty of training courses online. You can find them from: https://www.spooky2videos.com/courses/
And we also update some instructional videos on Youtube tunnel: https://www.youtube.com/c/Spooky2Rife
Many customers also share their usage experience and post their questions on our facebook group, over thousands of people are willing to provide their help: https://www.facebook.com/groups/spooky2
Of course, any questions, you can send them to support@spooky2-mall.com, they will provide help with you at any time.
“To skip to a specific day in the \Detox\Remote\Terrain – BY
preset, load the preset into a Generator control, type a preset
number into the Preset text field (see table below), type Tab,
and then click Start. ”
unable to find text field box. nd help, please
thnx
Hi, on the control tab, when you have loaded the terrain protocol, you will see a frequency list. Below it, tab the preset number on the Preset text field. Find more details in this blog: https://www.spooky2-mall.com/blog/how-to-resume-terrain-protocol/
What Spooky2 equipment needs to be on a wood surface? Does the central unit? What about the smaller generators?
Hello
Only when running Scalar do you need to keep the link cable at least one meter away from metal. The other equipment, including the central unit and smaller generators, does not need to be placed on a wood surface.
Have a nice day.
By mistake I did not run the Terrain protocol first before the other software. Should I uninstall the software and start over?
Dear Kath,
Thank you for reaching out. You do not need to uninstall the software or start over. You can simply run the Terrain Protocol now to help with detoxification before continuing with other programs.
Let us know if you need further assistance.
Best regards,
Spooky2 Team
What is the BY indicator on terrain? I see a lot of acronyms that im not sure what they are or how to utilize each different
Dear Kaci,
Thank you for your inquiry. The “BY” indicator on the Terrain protocol refers to the initials of the person who designed the program. It is used as a way to credit the creator of the protocol.
If you have any questions or need further assistance, don’t hesitate to get in touch with us at support@spooky2-mall.com.
Best regards,
Spooky2 Support Team
I am running the “terrain (R) – BY” preset program. But it continuosly loop the “1. Remove metal” phase. I understood the preset program will run for 11 days playing all the phases shoemwed in description. What am I missing?
Hi Alessandra, the “Spooky2 Terrain (R) – BY” preset is designed to run through all its “Remove Metals”, “Remove Chemical Materials”, “Systemic Toxins”, etc, phases over about 11 days.
If you’re seeing it loop “1. Remove Metals” only, here are some things to check and fix:
Stop the run, reload the full Terrain chain preset to be sure all sub-presets are present.
In the Control tab, make sure Overwrite Generator is checked and your correct generator is selected.
If you still want to skip ahead, enter the Preset number manually in the Control panel to jump to the next phase.
If you’re still stuck after trying that, please contact our customer support, and we’ll help get you back on track.
HI
I am having issues with trying to load the 11 day terrain protocol into the generator as well.
When I select Terrain R – BY it only brings Remove metals to the program section, I have shut the computer down, updated presets, checked software however everytime I do this the same thing happens. I can see all the presets in the presets/chain box however they do not come up into the program section.
Can you advise how to make this work, very frustrating trying to find the answer, I also see on the forum that many other people have had this issue before and even on the youtube video on how to upload the terrain protocol via remote it only shows the Remove Metals in the program section.
Hi! No worries — this is normal. Terrain (R) – BY is a preset chain, so the Programs section will only show “1. Remove Metals”, even though all 11 phases are loaded. The generator will move through them automatically during the 11-day run.
Make sure you selected the preset, then in Control, tick Allow Generator Overwrites before starting. If it still doesn’t advance, you can manually change the Preset # in Control.
If the issue continues, please reach out to our support team — we’ll walk you through it one-on-one. 🌿