At Spooky2, we always recommend our users to run the Terrain Protocol Preset for detoxification before starting their Rife frequency treatment. Many Spooky2 users do not understand why the Terrain Protocol is best to run as the first preset. The answer is actually quite simple. Detoxification is important before you run any Rife treatment programs.
Many people may not notice the fact that they have toxins build up in their body system. These excess toxins will actually cause physical and mental health problems such as chronic fatigue, headaches, insomnia and conditions. Many of these toxins come from things that you use or consume every day. For example, food, water, beauty and personal care products. Your surrounding environment may also affect your health conditions.
With all the toxins accumulated in your body system, Rife frequency energy cannot pass through your cells and organs effectively. Therefore, we recommend running the Terrain Protocol Preset to prepare your body for Rife treatment programs.
What is Spooky2 Terrain Protocol Preset?
This protocol was developed by Johann Stegmann based on his experience of treating people’s chronic condition using Spooky2. He found that people responded better to Rife frequency treatment when common toxins and parasites eliminated beforehand. The first Terrain protocol was a document that described programs to run on a daily basis. These programs selected by Johann are incorporated into the Spooky2 Terrain protocol presets. It treats you from the small up to the large and helps you to detox from flukes, parasites to heavy metals and other things.
How does Terrain Protocol work?
The Terrain Protocol Preset (Terrain (R) – BY) carefully steps through the detoxification process, removing heavy metals, chemicals, systemic toxins and parasites. Liver, kidney and lymphatic function can also be improved after the Terrain.
The duration of the Terrain Protocol is 11 days, after which it loops back to the beginning. During this time, the preset will automatically change settings to suit the treatment type. To do this, the preset contains several smaller presets, each loading after the other. It can be run on a single Spooky2 Remote but is enhanced if you run it concurrently with either Plasma, Scalar, Contact, Laser, or Coil mode.
There are 3 types of the Terrain protocol: the original protocol (Terrain, 11 days), a version without the mercury-detox frequencies (Terrain-Mercury, 11 days), and a version that does not kill bacteria or parasites (Terrain-Nonviolent, 10 days).
When running the Terrain protocol, make sure you keep yourself well hydrated to aid the elimination of toxins from your body.
Watch the following videos for Terrain Protocol instructions
If you have one generator, there are three ways to run Terrain Protocol:
1. Remote mode only.
2. Plasma mode + Remote mode.
3. Contact mode + Remote mode.
This video shows how to run Terrain Protocol BY in Remote mode using one generator:
How to Run Terrain Protocol in Remote Mode Using One Generator
This video shows how to run Terrain Protocol BY in Plasma or Contact mode using one generator:
How to Run Terrain Protocol BY in Plasma or Contact Mode Using One Generator
If you have two generators, there are two ways to run Terrain Protocol:
Plasma mode + Remote mode,
Contact mode + Remote mode.
This video shows how to run Terrain Protocol BY in Plasma or Contact mode using two generators:
How to Run Terrain Protocol Using Two Generators
FAQs of Terrain Protocol
Q: How can I resume my Terrain Protocol if my laptop accidentally shuts down?
A: It is always important to note which day you are on when running the Terrain Protocol so that you can start from the step you were at before. Here is a blog that demonstrates how you can resume your Terrain Protocol:
https://www.spooky2-mall.com/blog/how-to-resume-terrain-protocol/
Q: Does the Terrain Protocol automatically stop?
A: The protocol repeats indefinitely unless the user stops it or the computer malfunctions. If you run in Remote mode, it loops itself once 11 days over and you need to manually stop it.
Q: Will running Terrain affect any medications you are taking?
A: No. The Terrain will help remove any toxins from your body. Meds are also toxins, but it takes a while for the body to remove them, even with the Terrain running. If you are worried, you can run the Terrain-Nonviolent preset.
Q: What do you do if you cannot handle Terrain?
A: It is important that you stay hydrated when running Terrain Protocol. You may also pause it at any time to take a break. Plenty of people really struggle with the terrain and it’s a hardcore detox so listen to your body if you need to take it slow. If your reactions are strong, run Herx Helper (Herxheimer Helper) program.
How long should I let it run for? And how often? I have no ill effects from it running and am now on day 15. In the past I have run it for 11 and 22 days. Can I over due it? Thanks for your thoughts. K
Hi, 11 days as a cycle. And how often you run terrain protocol depends on your need. There is no restrict limit. Of course you can overdo it. Some Spooky2 users will run terrain protocol continuously and run other programs on another generator. Please do not need to worry:)
Do you have Information like this for morgellons and Lyme protocol?
Dear Sarah, thanks for your support! Of course, you can watch this training course of morgellons and Lyme protocol here: https://www.youtube.com/watch?v=tKyb75FhcpI&t=261s. Hope it helps. Any questions, feel free to contact our email: support@spooky2-mall.com.:)
Can you run the original terrain if you have mercury dental/cavity fillings?
Dear Cristina, if the material of your dental filling is mercury-related, we prefer that you use the Terrain-Mercury Protocol preset. Hope it helps. Any questions, feel free to contcat us via email: support@spooky2-mall.com.
Do I keep Terrain running 24 hours a day for 11 days, or a set time during waking hours?
Dear Shirley, we recommend that you run in remote mode 24/7 for 11 days, but of course, if you want to run while awake that’s fine too, you can set it up manually. If you have any questions, please feel free to contact us via email: support@spooky2-mall.com.
For those getting started – here’s how I approached the initial detox … when first getting started using the terrain protocol I had some uncomfortable herx reactions so I switched to the low power version (remote) and I also pause in between preset days. That has helped me self-manage the program so I don’t take in more than what my body can handle. I look forward to clearing out toxins overall so I can move on towards specific healing frequencies that I have researched.
Hi friend, thanks for sharing. Have a beautiful day! 🙂
Hi Jen, I am just getting started and haven’t yet started Terrain. When you say you paused between preset days, does that mean after each 11 day cycle or in between each day of the 11 day cycle. Feeling like I need to go slow and easy.
Thank you so much for your message.
Hello
Thank you for reaching out.
To get the best guidance, I recommend contacting the official Spooky2 customer service team email:support@spooky2-mall.com
They can provide detailed instructions, troubleshooting help, and personalized support.
And our support website is a great resource for any questions you may have. Feel free to explore and search for information you need. The website address is as follows:https://www.spooky2support.com/hc/en-us
Have a good day!
What kind of reactions will i feel? What should i expect to feel like by doing the 11 day remote detox?
Hello Sally, during your Terrain Protocol, you may experience a Herxheimer reaction, characterized by symptoms such as fatigue or listlessness. If these occur, it’s advisable to pause the program temporarily and take a break. To alleviate these reactions, consider running the “Herx Helper” on another generator. This can help manage and reduce the symptoms effectively. Hope it helps.
Hello!
I will be finishing the 11 days later today. My husband and I have lots of questions but for now, I’ll start with:
– Do I need to be in the same room where the generator is running? I’ve been out of the house (running errands) and I didn’t pause it. My husband will start the terrain after mine is finished. I didn’t feel any difference throughout the 11 days, I am afraid I did something wrong!
– We got the 2 generators kit, and I am using the remote with my fingernail. Could we have connected the second generator for my husband and have the terrain protocol running simultaneously with his fingernail in the second remote? (too late now but we will use this answer to run other therapies -probably different for each of us- simultaneously if that can be done). I know the 2 generator are recommended for running a therapy on one and a detox on the other one for ONE person, but we would like to be able to start therapies together and not to have to wait until one of us is finished.
– Somewhere we watched or read we can place fingernails of 2 different people in one same remote, one generator. How does the generator distinguishes what therapy is targeting what person?
– Last one, not TERRAIN related question. I registered for the spooky forum and after attempting to login, it showed me wrong password. I knew the password and it was correct, after a couple of attempts it said to contact the manager administrator. I clicked the link only to found a note saying the manager administrator contact page has been disabled so I haven’t been able to use the forum for that reason.
We are SO excited about this! Is overwhelming the amount of things we need to learn but I totally look forward to do it.
Thank you in advance for your very appreciated help and response!
Thank you for reaching out, and we’re glad to see your excitement about starting with Spooky2! Here’s a response to each of your questions:
Running Terrain While Out of the Room: You don’t need to be in the same room while the generator is running, as Remote mode works through DNA entanglement, making it effective even if you’re out of the house. So no worries if you’ve been running errands during the 11 days; the protocol should still be working as intended.
Using Two Generators Simultaneously: Yes, you can absolutely use the second generator with your husband’s fingernail in a separate Remote to run the Terrain protocol simultaneously. Each generator operates independently, so you could run different therapies on each one, allowing you both to start and run treatments at the same time.
Using Two Fingernails in One Remote: It is possible to place fingernails from two people in the same Remote, but there are a few key steps for this to be effective and safe. Make sure each nail piece is isolated within tape or a label so the DNA samples don’t touch. This setup helps to avoid mixing energies and allows for easy removal if someone experiences a Herx reaction. It’s also essential to label each sample so you know which one belongs to whom.
Forum Login Issue: For issues with logging into the forum, we recommend reaching out to Spooky2’s customer support team at support@spooky2-mall.com. They can assist with any account or forum access issues so you can participate fully in the community.
It’s wonderful that you and your husband are diving into this together! The learning curve can seem overwhelming, but feel free to ask any questions, and we’re here to support you every step of the way.
Hi everyone,
Looking at the above comments, I wondered if it is also possible to simultaneously run from a Gen X, two Terrain Protocols remotely for myself and my partner, but where only one is “minus mercury” and the other is not?
Sorry if this is a bit basic. I’m totally new to it and would like to run the 11 day terrain for the both of us and would prefer if we could do the detox together! Any pointers are gratefully appreciated! Thanks! 🙂
Dear John,
Thank you for reaching out! Yes, you can run two separate Terrain Protocols remotely on a Gen X for yourself and your partner simultaneously. Since Gen X has two generators, you can load the standard Terrain Protocol on one and the “minus mercury” version on the other.
This setup allows you both to detox together while tailoring the protocol to individual needs.If you ever need further clarification or have specific questions, please feel free to contact us at support@spooky2-mall.com.
Best regards,
Spooky2 Support Team
Hi, is it alright to run remote terrain protocol while I am on chemotherapy? Or should I avoid running it for first few days after the chemo injection so that it does not offset the effect of the chemo?
Dear Gek Cheng Tan,
Thank you for reaching out.
We do not recommend running the Terrain Protocol during chemotherapy, as the body is in a delicate state during this process. However, you may consider running programs that help alleviate symptoms based on your body’s tolerance. For example, if you are experiencing pain, you can run the Sedation and Pain Relief program for relief.
If you ever have any questions or need further assistance, please feel free to contact us at support@spooky2-mall.com.
Best regards,
Spooky2 Team
Hi
I’m completely new to all this and it’s sounds quite complicated. Is there a place I can watch some kind of beginner videos or “how-to’s”?
I don’t even understand all the talk of generators and the different things like remotes and rods, etc. also, can this be done on a MAC OS? Or is it only PC?
Dear Holly,
Thank you for reaching out! I understand that the Spooky2 system can seem a bit overwhelming initially, but don’t worry—plenty of resources help you get started.
Here are two videos that will guide you through the basics:
1. How to Load and Run Terrain Protocol Using GeneratorX:
Watch here(https://youtu.be/zsltMSfCZJ8?si=XwYhi6CFZrQ5ulfW)
2. Spooky2 Online Training Course – Terrain Protocol:
Watch here(https://vimeo.com/1074573035)
These videos will explain the core concepts, including how to use generators, remotes, and rods.
Regarding your question about Mac OS: Spooky2 software is currently designed for Windows PCs. However, you can run it on a Mac using a virtual machine or Boot Camp to install Windows.
If you have any questions or need further assistance, please contact us at support@spooky2-mall.com.
Best regards,
Alan Heilpern
Hi
I am on day 6 of my terrain protocol, and would like to set my husband up on his generator for his detox. When I try to add the generator, I am not seeing his generator added nor is the screen showing up in a separate box.
Is there a video for this?
Thank you
Hi! To set up your husband’s generator for his Terrain detox, please check these steps:
1. Make sure the generator is powered on and connected to your computer via USB.
2. Open the Spooky2 software, go to the Control tab, and check the Generator dropdown — all connected generators will show there (they won’t open in separate windows).
3. If you don’t see it, unplug and reconnect the USB cable, or restart the software. Also, make sure USB drivers are installed correctly.
4. If you’re using multiple generators, each one should show with a unique port number.
If you’re still having trouble, please take a photo of your setup and email it with details to support@spooky2-mall.com — our team will help you step by step!