The DH experimental presets, created by David Halliday, are designed to help with various ailments and promote overall well-being. Since its inception, the DH presets have gained popularity among many Spooky2 users. Numerous people have experienced positive effects after using them. As a result, an increasing number of users are becoming curious about the DH presets but are unsure where to download them and how to run them. In this blog, we will talk about it.
How to Run the DH Preset with Spooky2
First, please download the newest DH presets by clicking here.
After installation, you will find the DH Experimental Presets in the Presets tab.
Before running the DH Presets, you may want to take a look at these two PDFs for a general understanding of the DH Presets.
Next, you can choose a frequency transmission mode to run the DH Preset. You can opt for Spooky2 GeneratorX Pro Essential Kit, which includes four modes: remote, contact, Cold Laser, and PEMF, allowing you to select the mode that suits you best. Next, we will take the remote mode as an example to show you how to run DH Preset.
Step 1: Click “DH Experimental Frequencies” under the Presets tab and choose “Remote.” Then, you can select the preset you want to run by entering the keyword, such as “Sleep.” And whenever you run the program, please read the note section on the right. It contains information, such as runtime and hardware connection recommendations, to help you get the most out of DH presets.
Step 2: Go to the Control tab, tick “Overwrite Generator,” choose your generator port, and click the “start” button to start.
Related QA
Q: When running the DH presets, do we have to run the first six presets first each time?
A: Yes, it is recommended to run these presets alongside later DH presets or at least periodically within the same day until there are no more physical, mental, or energetic changes. Presets DH1-6 prepare your body for receiving later presets. For efficiency, DH1-6 can be run on a separate generator. You can find related information from the picture below:
Q: How can you run several DH presets one after the other?
A: You can chain the presets to create a preset chain and run them on one generator. They will run one by one in sequence. You can find detailed instructions on how to create a preset chain in this video:
Testimonials from Spooky2 Users
Testimonial One – Cavity
“Wow, wow, wow, I am completely blown away by this. We noticed a cavity forming on our son’s tooth, so on Tuesday night and Wednesday, we started running DH preset No.12 – Teeth & Gums Decay & Restoration in Spooky2 Remote 24 hrs a day. And we listened to MP3 of the same frequencies on the way to and from my son’s school. I’m very pleased with the results in such a short period of time.”
Testimonial Two – Gray Hair
“I’d like to share so others could possibly benefit as well. “Return gray hair to normal” on the DH presets! Thank you David!! I ran it on remote for six months. See for yourself!”
Testimonial Three – Relaxation
“DH-0164 Relax. I ran this preset yesterday in Remote for about 4 hours during the day and had the most relaxing evening. I just felt completely at ease. The DH presets really help with an anxious nervous system. It helps balance the sympathetic and parasympathetic. DH-0245 helps me with that as well. Thank you, David Halliday, for your generous contribution with these presets!”
With the potential to address various health concerns and support overall wellness, the DH presets have proven effective for many people. If you’re interested in them, don’t hesitate to try Spooky2 now to enjoy the amazing benefits of the DH presets! There are even more powerful and wonderful presets waiting for you to explore.
Also, we welcome everyone to share their stories of using the DH presets in the comments section.
Related Blog
Dental Problem Buster – Spooky2 DH0012 Teeth Preset
Can the DH Presets run on scalar ?
Dear Tom, yes, if you have DH Preset in your software then you can just click on DH Experimental Frequencies under Preset and select Scalar to run the preset you want to run. Any questions, feel free to contact us via email: support@spooky2-mall.com.
Hello,
This is great. I am trying to figure out DH 404 Return Gray Hair to Normal. How do I load it into the program?
Dear Rebecca, you can click to download the installation package of the DH preset provided for you in this blog, and then install it into the Spooky2 folder on your computer, open the software under the preset, search for 404, and click run. If you still don’t know how to do it, you can contact us via email: support@spooky2-mall.com. Our customer service will help you solve this problem.
I used the first six precepts in DH Frequencies during the day, and before going to bed ran the sleep program, I must say I have never had a better sleep.
I am enjoying the large amounts of programs given in the DH Presets thank you always for the options for healing our bodies.
Dear Lynn, thanks for your feedback. Have a beautiful day! 🙂
Dear all, only today I have downloaded the DH experimental frequencies and tried to upload on GenX some of the presets. Apparently everything worked well, but when I tried to run one of them on remote, leds of the remote doesn’t light. Which is the problem here, the fact that I loaded presets instead of programs or what is wrong? Thanks in advance!
(I have also posted this on the group Spooky2 Spiritual healing)
Hello Cristian, please send the problem in the form of picture or video to our email: support@spooky2-mall.com, our customer service will help you to check this problem. Thank you for your understanding and support.
In the instructions it is recommended to run it close to your left arm. This was not mentioned in any of the testimonials. Is there any info on sitting right next to generator versus the usual remote method?
Dear Petra Csukardy,
Thank you for reaching out with your question!
We appreciate your attention to detail. While the instruction manual does indeed recommend positioning the device close to your left arm for optimal results, testimonials may not always specify this, as experiences can vary depending on the setup and individual needs. This recommendation is based on proximity to the body’s energy flow, which can potentially enhance effectiveness, especially when using non-remote methods.
Sitting close to the generator may offer certain benefits due to the direct energy interaction. In contrast, the remote method provides convenience and flexibility, allowing you to receive frequency applications without being physically near the generator. Both methods are designed to deliver beneficial results, so you may choose based on your comfort and schedule.
If you need further assistance, please contact Spooky2 support at support@spooky2-mall.com.
Best regards,
The Spooky2 Team
I am currently using the dh frequency presets but finding it odd. When I overwrite generator and start the frequencies it only runs for 3 seconds and stops. I push start again and the same thing. Is there a setting I am missing?
Dear Rick Mckenna，
Thank you for reaching out! It seems there might be an issue with the DH frequency preset setup. Please check the following:
1. Preset Selection: Ensure you are using the correct DH preset under the “Presets” tab in the Spooky2 software without modifying it.
2. Generator Overwrite: Click “Overwrite Generator” to apply the settings correctly.
3. Frequency Duration: Verify the frequency cycle in the “Program” tab; the short runtime might indicate a very brief cycle.
4. Software Settings: Ensure no conflicting settings like “Pause” or “Repeat” are enabled.
If the issue persists, try restarting your software and generator, updating the Spooky2 software, or testing another preset. If none of these help, kindly share your generator model and software version for further assistance.
We’re here to help! Please feel free to reach out at support@spooky2-mall.com.
Best regards,
The Spooky2 Team
Please, please have a trainer do a thorough and clear tutorial on how to run the DH Experimental Frequencies…..including how to chain the
First 6 Presets…… any info I have seen so far seems to contradict other info.
I hope you will consider this for we people,e who need the help.
Thank you
Dear Bonita,
Thank you for sharing your suggestion .
We greatly appreciate your feedback and will arrange for a detailed tutorial to be prepared in the future. Please stay tuned for updates.
If you have any further questions, please feel free to contact us at support@spooky2-mall.com.
Warm regards,
Spooky2 Team
Hello.
The PDF Says to run DH 1-6 on lower voltage (0.3-3V). Where exactly can I configure this in the settings?
Thank you.
Dear Fernando,
Thank you for your question!
To adjust the voltage settings for DH 1-6, follow these steps in Spooky2 software:
1. Open the Control tab and select your generator.
2. Navigate to the Settings tab.
3. Locate the Amplitude setting (voltage).
4. Manually adjust it within the recommended range of 0.3V to 3V.
If you ever have any questions or need further assistance, please feel free to contact us at support@spooky2-mall.com.
Best regards,
Spooky2 Team
Hi, many of the presets specify only running once or twice, is this an hour, a day, a week, a month – ever? And I can’t work out why. Thanks
Dear Vivienne,
Thank you for your message. Regarding the DH presets, the recommendation to run them once or twice typically refers to the frequency of use rather than the duration for each session. The specific time for each run may vary based on the preset, and it’s generally suggested to follow the guidelines provided with each preset for optimal results.
If you’re unsure, you can always start with shorter sessions (around 30 minutes to an hour) and adjust based on how your body responds. Please refer to the detailed instructions for each preset or feel free to reach out for further clarification on any specific preset.
Thanks again, and we’re here to assist you further!
Best regards,
Spooky2 Support Team
Can this be used on GenPRO?
Dear friend,
Yes, the DH presets can be used on the Spooky2 GenPRO generator. The DH Experimental presets are compatible with various Spooky2 generators, including the XM, GX Pro, and GenPRO, which are designed to support these frequencies as well.
If you need help setting them up or encounter any issues, feel free to contact us at support@spooky2-mall.com. We’re here to assist you!
Best regards,
Spooky2 Customer Support
Hi, I am a little confused.
1. When setting DH 0001 Spiritual Wellbeing it states a Run Time of 23 Min. and Repeat Each Frequency 23 times.
So does this mean it runs 23*23 = 529 minutes in total?
2. Can the DH Programs run on the MicroGen too?
Thank you
Hi Yvonne!
About the runtime:
When the description says “Repeat Each Frequency 23 times”, it means each frequency is repeated 23 times within the total runtime listed (e.g., 23 minutes). It does not mean 23 × 23 = 529 minutes.
About MicroGen compatibility:
Yes — the DH programs can run on other compatible generators such as the HeaWea MicroGen. There’s a guide that shows how you can append the DH program list to the MicroGen’s Custom.csv database so you’ll have access to over 400 DH programs in its software.
https://www.heawea.com/dh-experimental-frequencies-for-heawea-microgen/