Blood pressure support often involves steady, long-term care, but there are times when levels can rise suddenly and need a more immediate response. Many people are therefore looking for supportive options that fit easily into everyday life and can be used on an ongoing basis.
This article shares two real experiences using Spooky2 holographic stickers: one focused on long-term, non-contact daily support, and the other showing a quicker, more direct response.
Case Study 1: Long-Term, Non-Contact Support
The user kept the holographic stickers next to the bed in an envelope together with nail clippings. The stickers were not attached to the body and remained in the same place every night during sleep.
Blood pressure was taken each morning upon waking. Over an eight-day period, only one day showed a systolic reading above 140. By comparison, in the ten days prior to receiving the stickers, only two days had systolic readings below 140.
The user noted that the stickers appeared to be working without being placed on the body and expressed surprise at the results. The envelope had initially been wrapped in foil to protect the stickers from Wi-Fi exposure, but this was later removed after learning it was not necessary. A shungite necklace was kept nearby, which the user felt served a similar protective purpose. The user also stated they were completely new to this type of technology, aside from limited prior use of a frequency-based app.
👉 Click Here to Read the Original Post
Case Study 2: Immediate Response with Imprinted Stickers
User Experience
The user reported a strong and repeatable response when using imprinted holographic stickers with their mother. Her systolic reading dropped from 158 to 102 after applying the sticker. To confirm the effect, the user tested several times with and without the sticker, and each time the sticker was used, the blood pressure dropped within minutes. The user described the result as “like absolute MAGIC.”
Programs Used
- Amlodipine (MW)
- Amlodipine besylate (MW)
- Captopril (MW)
Setup and Imprinting Process
Step 1: Visit the Official Spooky2 Website to download and install the latest version of the Spooky2 software.
Step 2: The programs listed above were first saved as a custom program with a dwell of 0.5.
Follow the numbered steps in the image, from 1 to 4, to save your custom program:
Step 3: The user then selected Shell Empty Presets, chose Remote, and used MW Emulate.
Preset Path: \Shell (Empty) Presets\Remote\MW Emulate (R) – JW
Step 4: Then navigate to the Programs tab, search for the custom program you just saved, and add it for imprinting the holographic sticker.
Disclaimer：This content is shared with respect for the original author’s intention and is intended for personal and educational reference only. It is not intended for commercial use.
👉 Click Here to Read the Original Post
A Complement to Long-Term Sticker Support
The two cases above show how holographic stickers can be used for long-term support, whether placed nearby or worn on the body. In some situations, however, blood pressure may rise suddenly. When this happens, Contact mode can be considered as a short-term option for more focused support.
Recommended Preset and Programs for Contact Mode
Preset Path: \Shell (Empty) Presets\Contact\Healing (C) – JW
In the Programs tab, simply search for “hypertension” to see a range of blood pressure–related programs. Users can choose a small selection to run based on their own needs.
Below are some examples commonly used for reference:
- Blood Pressure, High (Hypertension) (ETDF)
- High Blood Pressure Hypertension (XTRA)
- Blood Hypertension (XTRA)
- Hypertension 2 (BlO)
- Hypertension 5 (BlO)
It’s best to start with a few programs, observe how your body responds, and adjust from there as needed.
Common Questions About Holographic Sticker Imprinting
1. Do airport scanners or X-ray machines affect imprinted holographic stickers?
- Use a small pouch with pennies to store stickers. The copper helps buffer stronger electromagnetic fields, and one user has used this method for about two years with good results.
- Store stickers in RFID sleeves as another simple protective option.
2. How can I prevent holographic stickers from imprinting onto each other during storage?
Wrap stickers with different frequencies separately in aluminum foil, or store them in RFID sleeves.
3. How long does an imprinted holographic sticker last?
Imprinted holographic stickers can last a long time, as long as they are kept dry and protected from wear, direct sunlight, and strong magnetic fields.
👉 For more answers, please refer to the Holographic Stickers FAQs.
A Flexible, User-Led Approach
These experiences show that there isn’t just one “right” way to use holographic stickers. Many people start simple, see how their body responds, and adjust over time. Some users also choose to imprint frequencies onto personal items that can carry frequencies, such as crystal jewelry, making it easy to keep that support close throughout the day. If you’re curious, feel free to explore what works best for you and take things at your own pace.
If you need holographic stickers, please contact the Spooky2 customer service team for assistance.
📫Email: support@spooky2-mall.com
Really interesting case study ! it is clear, structured, and easy to follow. The two examples show both long-term support and rapid response, with practical steps and safety-minded storage tips. Thanks for sharing !