A biofeedback scan identifies the frequencies best suited to your unique body. By measuring subtle fluctuations in the scalar field, Spooky2 Scalar Digitizer makes this the only scalar system capable of performing biofeedback scans. Read more about Scalar Digitizer scan here: https://www.spooky2-mall.com/blog/unlock-the-healing-power-of-scalar-biofeedback-scanning-for-better-health/
Whether you’re running your first scan or refining your workflow, this FAQ addresses common questions to help you master Spooky2 Scalar biofeedback scans with confidence.
Q: What are the differences between Scalar Digitizer Scan and Scalar Digitizer Hunt and Kill?
A: A Scalar Digitizer Scan measures minute fluctuations in the scalar field to identify frequency hits. Scalar Digitizer Hunt & Kill takes this a step further by adding an automated killing action. Once the scan identifies hits, the generator would run the killing procedure. This scan-and-run cycle repeats automatically until no further hits are detected or you stop the process.
Q: Can I perform other BFB scans in the scalar field? Why can I do BFB scans using the Scalar Digitizer?
A: No. Other BFB methods use different detection logic that is incompatible with Spooky2 Scalar. The Scalar Digitizer is the only BFB scan method designed for Spooky2 Scalar as it uses one GenX port to modulate the field and the other to record signal changes. Other methods would produce inaccurate results due to field interference.
Q: Can I perform a Scalar BFB scan with an XM generator?
A: No. Spooky2 Scalar Digitizer measures tiny changes in the scalar field including the phase angle, which cannot be achieved with an XM. For XM users, Spooky Pulse remains the standard BFB option.
Q: Can I use DNA samples to do a Scalar scan?
A: No. Scalar scans require you to be physically present inside the scalar field. Scalar scan works by measuring tiny changes in the scalar field around your body during a scan, rather than analyzing biological samples. If you prefer to scan DNA or other biological samples, Spooky2 Sample Digitizer is the appropriate approach.
Q: If there are other objects in the scalar field, would their frequencies affect the results?
A: To ensure maximum accuracy during a Scalar BFB scan, you should be the only living presence in the field. Pets, family members, or even large plants can introduce interference that skews the data. Additionally, keep active electronics like cell phones and tablets away from the field, as they can disrupt the subtle scalar energy.
Nota bene: While scalar energy passes through non-living objects and metal without disruption, individuals with pacemakers or other electronic implants must not use or enter Scalar scans.
Q: What if no one else is around to hit the Scan button?
A: You can delay the scan by changing the “Start Delay” value to 2000 or higher in the Biofeedback Scan section under the Control tab. This will allow you some time to settle down before the real scanning process begins.
Q: During a Scalar scan, is it normal that the Receiver’s red light doesn’t turn on?
A: It is normal that the Receiver’s light is not on when doing BFB scans. The light may be on, dim or even off because some power is absorbed by the Digitizer and the link cable becomes more sensitive to earthing.
To confirm that the scalar field is active, select “Display GX Current + Angle” under the System tab and move your hand within the field; visible fluctuations in the Control panel graph will verify that the field is present and functioning correctly.
Q: If the estimated run time is too long, can I manually shorten the scan?
A: In the Control panel, you can see the estimated total run time of your scan. You can adjust the run time by toggling the settings in the Biofeedback Scan section in the Control panel. However, we generally recommend keeping the default values to ensure the scan accuracy.
Q: What can I do with my Scalar scan results? Do I need to remove the Digitizer to run the results?
A: Once your BFB scan completes, you will get a list of frequencies that show up as your scan results. They can be saved in a custom program that you can run with the Spooky2 Scalar General (SS) shell preset. To ensure maximum efficiency during your treatment session, please remove the Scalar Digitizer from the Transmitter box. For detailed instructions, please visit https://www.spooky2scalar.com/how-to-run-scan-results-using-spooky2-scalar/
Join the Conversation
Want to connect with other Spooky2 Scalar users? Join our Spooky2 Scalar Facebook group to share your experiences, discover new tips, and get support from our vibrant community.
