Dark Light

How to Do a GX Pro High-Frequency Biofeedback Scan 8

Share this:

In addition to the GX Pro general scans, we can also use the GX Pro for High-Frequency Scanning, which has a broader range of scanning frequencies than regular scans. From low to higher frequencies, high-frequency scanning can comprehensively detect pathogens in your body and provide more accurate results. So, how do we perform high-frequency scanning? Scroll down to find out.

What Is GX Pro High-Frequency Biofeedback Scan

The High-Frequency Scan, characterized by the higher frequency scanning range, covers frequencies from 41,000 Hz to 18 MHz, while the general BFB scan only covers a range from 41,000 Hz to 1.8 MHz. This scan can only be performed with the GX/GX Pro in contact mode. But we can use any mode to run its scan results.

The Advantages of GX Pro High-Frequency Biofeedback Scan

First, compared to the Spooky2 Pulse Scan, the GX Pro scan is much quicker. There are two reasons:

1. GeneratorX Pro detects electrical signals that travel very fast.

2. The response detected is a measurement of the electrical signals and does not rely on a physiological response like a heartbeat or perspiration.

Second, compared to the GX Pro general Scan, the GX Pro high-frequency scan can detect pathogens at higher frequencies, leading to more comprehensive and accurate results.

How to Do a GX Pro High Frequency Biofeedback Scan

Before performing the high-frequency scan, we recommend using a Baseline to improve accuracy. The baseline is a preset that automatically removes all electrical noise from the signal and helps produce the most accurate scan results. For how to use baseline, please watch this video.

After finishing the baseline, you can follow these steps to do the actual high-frequency scan:

Step1: Hardware Connection

  • Connect the generator to the computer’s USB port and the power supply.
  • Connect the TENS cable to the Out1 port on the generator and attach the TENS pads to the problem area of your body.
  • Switch on and identify the generator.


  • You can use Spooky2 Boost with this preset, but the signal is purer if you directly connect the TENS pads to the generator output port.
  • You don’t have to put the contact pads far apart. It is better to have them very close together because if you only have bad cells between the pads, the results will be pure and super-accurate.

Step 2: Software Operation

Open Spooky2 software and go to Preset tab>Biofeedback scan>GeneratorX>GX High Frequency Biofeedback Scan (C) – JW. You can find more details from the note part of this scan preset.

Go to the Control tab> tick Overwrite Generator>choose port number>click Scan.
Save your scan results.

Then, you can run the scan results with the mode you prefer.

Testimonial from Our Customers

Customers speak highly of the high-frequency biofeedback scan. For example, this customer filmed a short video to share her wonderful experience of running high-frequency scans with us. Let’s watch the video together.

In conclusion, the high-frequency scan can provide more precise frequencies tailored to your needs. It is also easy to operate as you follow the steps in this blog. If you are interested, welcome to check out the Spooky2 GeneratorX Pro and contact mode accessories to discover more benefits of the scan.

Share this:


  1. She was using a Gen X, not a Gen X Pro. Do you have actual successful reviews of anyone using the Gen X Pro for Biofeedback? I have read that the Pro does not work for Biofeedback (due to updates and change to the internal hardware) and that seems to match the lack of results I get from mine. I’d love to be wrong so please show more recent success with an actual Gen X Pro. Thank you.

    1. Dear Kenny, Thank you for your suggestion, you can check here: https://www.spooky2reviews.com/?s=biofeedback to see if there are any REVIEWS on using the GXPro for biofeedback, and we’ll take your suggestions and keep improving ourselves. About this question you raised you can contact our customer service team, there will be a professional engineer to answer your questions.https://www.spooky2reviews.com/?s=biofeedback

  2. The video confuses matters concerning the use of the boost during a scan. Your official documentation says, “You can use Spooky2 Boost with this preset, but the signal is purer if you directly connect the TENS pads to the generator output port.”
    However the person in the video advocates you will get better results using the boost.
    You should either revise your documentation or revise the video. Right now they are both giving contradictory information.

    1. Dear Karl, every customer has different results with Spooky2 products, and many customers choose how to use our products based on their physical condition. It is their personal choice. You can run high frequency scans without using boost as we suggest. But if you want to try it too, you can look at running it with Boost to see how it works for you. If you have any questions feel free to contact us at email.

  3. Look. Can Delilah from the Netherland or anyone else at Spooky2 not understand that it is impossible to see her screen clearly AND therefore follow the cursor and what she is talking about.

    There are newcomers to Spooky2 coming in all the time that get lost within within minutes and get dispirited. I have been using Spooky2 for many years now and gave up halfway through.

    THE TAKEAWAY here :-
    1. Show the laptop screen as a full page. Was there a cursor somewhere ? What was the hurry ??
    2. Talk slowly, talk slowly, do you understand, talk slowly. My native tongue in English – I am lucky that she speaks English too. What chance does a non English speaker have ? This talk is meant to help people understand, not highlight how clever and fast you are.


    1. Dear friend, we are sorry for the inconvenience caused. Regarding any questions you have about using Spooky2, please feel free to contact us at email: [email protected], our customer service team will help you to solve your problems. Here is also a course about Spooky2 to help you set up Spooky2 better: https://www.spooky2academy.com/courses/all-courses/, if you are interested in this video, you can click to watch it on youtube, use slow speed combined with subtitles to watch it. Thanks for your understanding and support.

  4. Can somebody run a scan for me ?

    1. Hi friend, If you don’t know how to do a scan, you can contact us by email: [email protected] and our customer service team will help you to solve your problem.

Leave a Reply

Your email address will not be published. Required fields are marked *