Dark Light

Understanding Scan Modes: GX Pro, XM, and Scalar 4

Share this:

As you may know, biofeedback is a function of the Spooky2 system designed to determine the right frequencies for your body. Over the years, many customers have given high praise after using it. So far, GX Pro, XM, and Scalar can all use biofeedback. How to do the scans with each one? Keep reading to find out.

What Is Biofeedback Scan

Spooky2 Biofeedback Scan is a potent tool for listening to your body and identifying the best frequencies. A biofeedback scan requires a frequency sweep in the body and a system to monitor the results. The sweep will damage or kill harmful microorganisms and cause stress to your body. The system then recognizes the stress and records the corresponding frequencies as results, which you can use to treat your body accordingly.

GX Pro Scan

There are two types of GX Pro Scan: GX Pro TENS Scan and GX Pro Sample Scan.

Preparations for GX Pro TENS Scan
A Spooky2 GeneratorX Pro
A Spooky2 TENS Cable
A Spooky2 TENS Pad

Preparations for GX Pro Sample Scan
A Spooky2 GeneratorX Pro
A Spooky2 Boost
A Spooky2 Sample Digitizer
A Spooky2 Sample Digitizer Replacement Slides
A Spooky2 Remote v2.0

The GX Pro’s circuitry uses precise signal tracking on the body and transmission of both frequencies. Changes in the electrical pattern indicate that a strike has been detected and recorded in the scan results.

In general, a GX Pro Scan takes 6 minutes to complete, and its results are usually more precise. If you want to do a local scan, try using this model.

XM Scan

Preparations for XM Scan:
A Spooky2-XM Generator
A Spooky2 Boost
A Spooky2 Tens Cable
A Spooky2 Tens Pad
A Spooky2 Pulse Ear Clip or Finger Clip

The XM Scan monitors your body’s response to a particular frequency. The Spooky2 Pulse’s heart rate monitor will detect and record any subtle change immediately. After finishing the scan, Spooky2 Pulse will go through its list of “hits” and sweep carefully around them to find the exact frequencies related to these tiny stress reactions.

However, an XM scan lasts about 40 minutes, during which you need to keep your heart rate stable. Therefore, it is better not to move or do anything that may excite you when doing an XM scan to keep the results accurate. If you want to do an XM scan, you need to be quite careful.

Scalar Scan

Before doing a scalar scan, you need to make sure you have a Spooky2 Scalar.

Preparations for Scalar Scan:
A Spooky2 GeneratorX/GeneratorX Pro
A Spooky2 Scalar Digitizer
A Spooky2 Scalar set

Spooky2 Scalar is the only scalar device that can perform biofeedback scans. During a Scalar Frequency Scan, the Spooky2 Scalar Digitizer monitors even the tiniest change in the scalar field to determine the most suitable frequencies your body needs. The scan results can subsequently be used to treat your health issues. GX or GX Pro is necessary for Scalar Biofeedback. GX or GX Pro features two function generators: G1 measures the response, while G2 modulates the scalar field.

When you do a Scalar Biofeedback scan, you’d better lie down and make sure you are the only person in the scalar field. To keep the accuracy of your results, please keep your children and pets away from Spooky2 Scalar while scanning.


If you are interested in Biofeedback Scan, please feel free to check out Spooky2 products. At the same time, if you want to try different methods of various biofeedback scans, you can choose to upgrade your Spooky2 kit. Spooky2 products have a 2-year warranty, and you can consult our customer service via LiveChat or [email protected].

Share this:


  1. Thank you that’s helpful.

    Melvyn Huggins
    1. Dear friend, Thanks for your suppoet! We’ll keep improving ourselves! Look forward to your continued attention! Have a beautiful day!

  2. For the Scalar Scan method, both GX and GX Pro can be used. However, for the GX Pro Scan method, GX (without Pro) is no longer listed, only GX Pro is listed. Does this mean that the GX Pro Scan methods will not work for the GX generator (without Pro)?
    Thank you for the information.

    1. Dear Jaroslav, so sorry to make you confused.For the scan method, it’s also work for GX. Any questions, feel free to contact our email: [email protected]. Thanks for your support and understanding.

Leave a Reply

Your email address will not be published. Required fields are marked *