Entire Terrain Protocol in One Preset 14

Share this:

I’ve created a single preset that contains the entire Terrain Protocol. I started with the 14 Terrain Protocol presets and merged them into one preset. This preset runs continuously, with a single cycle of the preset taking about 10 days. There are no breaks between each of the 14 programs.

In terrain.zip below is Terrain Protocol.txt, that you place in the Presets folder. There is also custom-terrain.csv, which has the 14 frequency sets that make up the terrain protocol, in case you want to lengthen one of the sets, or to put pauses between each set. Use the “Select Custom Database” command found in the Database menu. After you’ve finished with custom-terrain.csv, you will probably want to reselect your own custom.csv.

Each frequency set is repeated 12 times in the terrain preset. Because of this, if you want to create a pause, make a pause frequency set that is 1/12th of the desired pause time.

In the comment section of the preset is the following table:

Remove Metals(1/5376)
Remove Chemicals(913/5376)
Systemic Toxins 1(1393/5376)
Systemic Toxins 2(1537/5376)
Remove Intestinal Toxins(2137/5376)
Remove Systemic Toxins 3(2521/5376)
Parasites and Liver Function(2929/5376)
Kidney Function 1(3133/5376)
Kidney Function 2(3577/5376)
Cleanse Blood(3817/5376)
Kidney and Liver Toxins(4045/5376)
Intestinal Parasites(4417/5376)
Lymphatic System 1(4897/5376)
Lymphatic System 2(5197/5376)

This table gives you the frequency position in the preset of each frequency set, so if you want to jump to a particular set, you have the frequency position.

Because this is a long running preset, if you have any issues with brownouts in your electricity, you will definitely need to have a UPS (Uninterrupted Power Supply).

Please check the preset in the attachment.

Now we have a terrain preset in the software, for more, please go to this link: https://www.spooky2-mall.com/blog/the-terrain-protocol-presets/

Authored by: Bryan Yamamoto

Source: http://www.spooky2.com/forums/viewtopic.php?f=71&t=4990

Share this:


  1. What is needed to effectively run the terrain protocall?

    1. Hi, Floyd. Not many limitations to run preset because terrain preset is recommended to be the first program to run. It starts getting the body used to frequency input. If terrain is so strong, run Terrain-Nonviolent. Here is an article if you can’t handle terrain: https://www.spooky2support.com/hc/en-us/articles/360016522154

  2. Hello
    Entire Terrain Protocol in One Preset – do we need this? I thought the software has it all in the “Presets”
    I just started running the non violent Terrain on the XM Generator, the remote lights are flashing, but I am absolutely not sure if it works since I feel nothing.
    Preset Collections\Detox\Remote\Terrain-Nonviolent (R) – BY
    a added it to “Presets to Chain window – Control Overwrite Generator and pressed Start
    I see it running….

    1. Hi, it is normal you may not feel anything if you run it in remote mode. You can run Terrain(R)-BY and it is a preset chain so it will run itself one by one.

  3. Any ideas why my Gen X doesn’t repeat the protocols 12 times?

    Angelos Tzimidis
    1. Hi, Angeloes, you should misunderstand the blog. If you want to run the terrain protocol in one preset, you have to follow the blog to combine 15 preset in one preset.
      However, we recommend you run the terrain protocol in the spooky2 software directly.

  4. This may sound like a dumb question but this is the first time using my new Spooky 2. While in the preset mode, remote setting is in Detox and runs for 11 days does my laptop, Spooky2-XM Generator stay on at all times?

    1. Hi, yes. Your generator and computer both remain in run mode.

  5. Can terrains be run on two people at once with one GX? If so, how best to set it up? Thanks!

    Michelle Share
    1. Hi, yes you can. You can directly place the fingernails of two people into one remote. For the same program, you can put in one remote.

  6. Can you load this whole preset onto the genx so that you don’t have to have the computer running as well?

    Josh Verhaeghe
    1. Hi, Josh. Yes, of course you can load Terrain onto your Terrain. Find more details from this blog: https://www.spooky2-mall.com/blog/how-to-load-and-run-terrain-protocol-using-generatorx/

  7. If you are running the Terrain on a GeneratorX Pro, how can you tell what day it is on? No problem when using the computer, but just shows 1. Remove Metals Minus Mercury all week.

    Rosemary Campbell
    1. Hi, do you download the terrain to your gx pro and then run the program offline? If so, you need to manually advance to the next preset every day! See details from this blog: https://www.spooky2-mall.com/blog/how-to-load-the-program-and-run-generatorx-pro-standalone/

Leave a Reply

Your email address will not be published.