Spooky2 has new full presets for the Terrain protocol, “Terrain (R) – BY” for remote, “Terrain (P) – BY” for plasma and “Terrain (C) – BY” for contact. “Terrain (R) – BY” can be run by itself, and it takes 11 days. With 2 generators, “Terrain (R) – BY” can be run with either “Terrain (P) – BY” OR “Terrain (C) – BY”.
Running the Presets
Plasma Plus (2 Generator)
| Day | Generator 1 | Generator 2 |
| 1 | DetoxPlasmaRemove Metals (P) – BY DetoxPlasmaRemove Metals (P) – BY | DetoxRemoteTerrain (R) – BY |
| 2 | DetoxPlasmaRemove Metals (P) – BY DetoxPlasmaRemove Metals (P) – BY | |
| 3 | DetoxPlasmaRemove Chemical Materials (P) – BY DetoxPlasmaRemove Chemical Materials (P) – BY | |
| 4 | DetoxPlasmaRemove Systemic Toxins 1 (P) – BY DetoxPlasmaRemove Systemic Toxins 1 (P) – BY | |
| 5 | DetoxPlasmaRemove Systemic Toxins 2 (P) – BY DetoxPlasmaRemove Systemic Toxins 2 (P) – BY | |
| 6 | DetoxPlasmaRemove Intestinal Toxins (P) – BY DetoxPlasmaRemove Systemic Toxins 3 (P) – BY | |
| 7 | DetoxPlasmaRemove Intestinal Toxins (P) – BY DetoxPlasmaRemove Systemic Toxins 3 (P) – BY | |
| 8 | DetoxPlasmaKidney Function 1 (P) – BY DetoxPlasmaKidney Function 1 (P) – BY | |
| 9 | DetoxPlasmaKidney Function 2 (P) – BY DetoxPlasmaCleanse Blood (P) – BY | |
| 10 | DetoxPlasmaKidney and Liver Toxins (P) – BY DetoxPlasmaIntestinal Parasites (P) – BY | |
| 11 | DetoxPlasmaLymphatic System 1 (P) – BY DetoxPlasmaLymphatic System 1 (P) – BY |
Generator 1 runs presets in “DetoxPlasma”. Generator 2 runs “DetoxRemoteTerrain (R) – BY”. While Generator 1 is connected to Spooky Central/Plasma, you run 2 sets a day as specified in the Generator 1 column in the table above. Each plasma set lasts 2 hours, and is followed by a beep. Run the first set the first thing in the morning, then 6-12 hours later run the second set. Optionally you can repeat each set more than once, spread out through the day. Generator 2 is connected to the Spooky2 Remote hardware, with or without Spooky Boost.
Contact Plus (2 Generator)
| Day | Generator 1 | Generator 2 |
| 1 | DetoxContactRemove Metals (C) – BY DetoxContactRemove Metals (C) – BY |
DetoxRemoteTerrain (R) – BY |
| 2 | DetoxContactRemove Metals (C) – BY DetoxContactRemove Metals (C) – BY | |
| 3 | DetoxContactRemove Chemical Materials (C) – BY DetoxContactRemove Chemical Materials (C) – BY | |
| 4 | DetoxContactRemove Systemic Toxins 1 (C) – BY DetoxContactRemove Systemic Toxins 1 (C) – BY | |
| 5 | DetoxContactRemove Systemic Toxins 2 (C) – BY DetoxContactRemove Systemic Toxins 2 (C) – BY | |
| 6 | DetoxContactRemove Intestinal Toxins (C) – BY DetoxContactRemove Systemic Toxins 3 (C) – BY | |
| 7 | DetoxContactParasites and Liver Function (C) – BY DetoxContactParasites and Liver Function (C) – BY | |
| 8 | DetoxContactKidney Function 1 (C) – BY DetoxContactKidney Function 1 (C) – BY | |
| 9 | DetoxContactKidney Function 2 (C) – BY DetoxContactCleanse Blood (C) – BY | |
| 10 | DetoxContactKidney and Liver Toxins (C) – BY DetoxContactIntestinal Parasites (C) – BY | |
| 11 | DetoxContactKidney and Liver Toxins (C) – BY DetoxContactIntestinal Parasites (C) – BY |
Generator 1 runs presets in “DetoxContact”. Generator 2 runs “DetoxRemoteTerrain (R) – BY”. While Generator 1 is connected to Contact hardware (Spooky Tube or TENS pads), you run 2 sets a day as specified in the Generator 1 column in the table above. Each Contact set lasts 2 hours, and is followed by a beep. Run the first set the first thing in the morning, then 6-12 hours later run the second set. Optionally you can repeat each set more than once, spread out through the day. Generator 2 is connected to the Spooky2 Remote hardware, with or without Spooky Boost.
Plasma or Contact (1 Generator)
If you only have one generator, twice each day you connect the plasma or contact hardware to your generator, and run the program specified in the Generator 1 column of the plasma or contact table above. After you finish each plasma or contact set, safely disconnect the plasma/ contact hardware from your generator and then connect Spooky Remote hardware to the generator, and run the corresponding set from “DetoxRemoteTerrain – BY”.
To skip to a specific day in the “DetoxRemoteTerrain – BY” preset, load the preset into a Generator control, type a preset number into the Preset text field (see table below), type Tab, and then click Start. Some days have 2 child presets, use the 1st child preset in the 1st session, the 2nd child preset in the 2nd session.
| Day | Preset Number |
| 1 | 1 |
| 2 | 2 |
| 3 | 3 |
| 4 | 4 |
| 5 | 5 |
| 6.1, 6.2 | 6,7 |
| 7 | 8 |
| 8 | 9 |
| 9.1,9.2 | 10,11 |
| 10.1,10.2 | 12,13 |
| 11.1, 11.2 | 14, 15 |
Remote Only (1 Generator)
Simply run “DetoxRemoteTerrain – BY” on your generator with the Spooky Remote hardware for 11 days or more (the preset repeats itself after 11 days), with or without Spooky Boost.
How?
Hi, Bill. You can learn how to run Terrain Protocol using two Generators in this video: https://www.spooky2videos.com/video/how-to-run-terrain-protocol-using-two-generators/ and run Terrain Protocol BY using one Generator: https://www.spooky2videos.com/video/how-to-run-terrain-protocol-by-using-one-generator/.
Help..! I have set up my new generator x and have got as far as Terrain(R-By)whichi selected… on the right a window opens Terrain Protocol for Remote….i have the Generatirx switched on also i connected my remote with nail clipping inserted….what next please
Hi, Cormac Cullen. You should go to control Tab and choose overwrite generator and choose port your remote attached, click start. The Terrain protocol will run continuously until 11 days. You can know more details here: https://bit.ly/2TJ1W3M
Perhaps i am missing something, but can i run terrain on 2 generators similtaneously? Each of them in remote mode? I do not have the option to have one in contact mode or plasma. Ty.
Hi, Grace, you can try and if it is too much or you get any herx, stop it and have a rest, then go on later.
What is the advantage of runnung the protocol using 2 generators? Are some actions overlaped? Is there some time saving?
Also is it ok to use 2 remotes do the protocol? How do you split the tasks? Thank you
If you go to Terrain pdf guide, you will find it has several ways to do terrain like plasma plus, contact plus and remote only. It is recommended to follow this complete protocol.
Maybe I’m just not smart enough to use this system. After 5 years of dragging the rig in and out of the closet I’m still struggling to get it to work. I started the Terrain (R) – BY and decided to rest at #5, put it on pause and the next day the start button was greyed out not allowing me to continue where I left off.
“To skip to a specific day in the “DetoxRemoteTerrain – BY” preset, load the preset into a Generator control, type a preset number into the Preset text field (see table below), type Tab, and then click Start. Some days have 2 child presets, use the 1st child preset in the 1st session, the 2nd child preset in the 2nd session.”
Where is this elusive “Preset text field” ? It doesn’t allow me type into ANY field so I’m back to square one (removing metals). Please advise how to skip the programs that have already run and pick up where I left off.
Dear Friend, you mentioned is the resume of the terrain protocol, we have the guide to show you, please check this blog:https://www.spooky2-mall.com/blog/how-to-resume-terrain-protocol/
Can people with metal dental implants or other metal implants do metal detox on Spooky2?
For more details, we recommend you can check this bolg:https://www.spooky2-mall.com/blog/are-all-the-spooky-subsystems-safe-for-pacemakers-other-electric-implants-or-metal-replacements/
Just a couple of questions on running the Terrain (R) Detox protocol.
First of all, how does the generator using a remote know which individual to run the detox on? or does Spooky2 GeneratorX with Remote v2.0 just run detox on anyone close by?
Secondly, is it possible to run 2 Remotes with Detox programs, i,e, start 1st generator on Terrain-Mercury (R) and leave it on Preset 1 under control Tab and then starting off another generator with remote on Preset 8?
Just wondering as this would cut down the times am guessing.
Hi, Angel, for terrain protocol, there are some presets included and it will detox step by step like removing heavy metals and so on.
Do you want to run 2 Remotes with Detox programs on same person or different one? We also recommend to go to our quick guide how how to run terrain protocol: https://www.spooky2.com/guide/
Can the scalar or Spooky2 be used during the 11 days? After the 11 days, does terrain protocol need to be run anymore?
hi Larry , you can also do detox after the 11 days.
So, I cannot use Spooky2 during those first 11 days until the Terrain protocol is finished?
Hi there. I am at a similar stage. I started running the Terrain (R) BY last night on generator 1. I would like to run Contact presets for Mold and then Coronavirus, one at a time on G2, while Terrain (R) on G1 is still running. Can I do this?
Yes, you can do that. Run Contact presets for Mold and then Coronavirus, one at a time on G2, while Terrain (R) on G1 is still running.
I have 4 children. I am going to start the 11 day terrain program tomorrow. Should I put my children’s nails in a separate remote from me and my husband? I bought an extra remote.
You can put in same remote.
I just started the terrain protocol today (remote + contact) and I’m just wondering why the schedule for contact mode presented here does not include the programs for the lymph system. The notes in the software have them included at the end of the terrain protocol.
Thanks a lot!
If you use remote to run detox preset, which contains 15 presets into one preset chain.It included”11.1 Lymphatic System 1 and 11.2 Lymphatic System 2″ for lyme system.
Thank you, Penny. That’s true, but the list on this page for how to run the contact mode has the same programs as the remote except the one for the lymph system. I was wondering if there is a reason for it.
Also, the notes section in the spooky2 software lists Contact/ Lymphatic System 1 (C) – BY for the 11th day of the protocol. This differs from the info on this site, where the program for the 11th day is the same as the 10th day. I would like to know, which one you recommend.
Thank you!
I am running my first terrain protocol with 2 generators for the portable kit. What happens at the end of the 11 days, can you get a print out of findings?a I found i was reacting days 4 &5 , which suggests systemic toxins greater than metal or chemicals ? Should these be the ones to repeat another time?
When the eleven-day cycle is over, you need to stop this protocol manually. Or not, the protocol will automatically repeat again. After having completed, you will not get findings for this process. So we officially recommend you to proceed run bfb scan, which is usually the second program most people take. BFB will reports you the most frequencies you should run.
Normally, if you react days 4&5, it may suggest systemic toxins greater. But someone will have herx during this process. So, if the reaction is too strong, it should be herx. You can run herx helper to reduce your symptoms. Also, you could stop and have a break. Drink enough lemon water to ensure your toxins discharged:)