As the world’s most sophisticated Rife machine, Spooky2 features advanced biofeedback scans that may identify appropriate frequencies for the sickness in your body. After using it, you can find the most suitable frequencies with the scan and enjoy targeted healing and fast recovery.
What Is Spooky2 Biofeedback
Pulse Scan, GX Pro TENS Scan, GX Pro Sample Digitizer Scan, and Scalar Digitizer Scan are the four methods of using Spooky2 Biofeedback. Each offers unique advantages, and you can choose one or more based on your needs, such as the device and treatment type you prefer.
During a biofeedback scan, a frequency sweep is applied to the body and monitored by a system. If you wish to perform a fast biofeedback scan, you can employ the Hunt and Kill preset.
What Is Hunt and Kill
Initially, this setup does a quick biofeedback scan, and a designated generator will run the hits afterward. The previous hits are then re-examined in the succeeding scan or run cycles to discover and eliminate mutated pathogens. You do not need to worry about the furtive viruses because the preset will find and eradicate them no matter how deeply and secretly they hide. The Hunt and Kill preset runs automatically until it is actively stopped or until no hits are found, then it continues to improve the findings of the initial scan.
The Hunt and Kill preset in Spooky2 Biofeedback is speedier and easier to use than the others. Compared to other presets, it is more convenient and helps you avoid tiresome, repetitive work.
How to Use Hunt and Kill
Before starting, you need to prepare a GeneratorX Pro, a Sample Digitizer, a Spooky2 Boost, a Spooky2 Remote, a Power Adaptor, and a USB Cable.
Step 1:
Use a USB Cable to connect the Spooky2 GeneratorX Pro to a computer.
Step 2:
You need to use a Sample Digitizer.
After placing the liquid biological sample on one slide, place the other slide on top. The two black Es must face each other.
Clip the slides with the Sample Digitizer, and insert it into the Out1 port of the G1 of GeneratorX Pro.
Step 3:
Connect the Spooky2 Boost to the Out1 and Out2 ports of G2.
Step 4:
Put your DNA Samples in the Spooky2 Remote and connect the Remote to the BN Port of the Boost.
Now, turn on your GeneratorX Pro.
Step 5:
Before running the preset, first set G2 to run scan results.
Go to Preset tab > Choose Shell Presets > Remote > Killing(R) – JW.
Go to the Programs tab > Ensure all repeated settings are set to 1.
Go to the Control tab > Tick Overwrite Generator > Select the corresponding port. (You can find the port number on the screen of GeneratorX Pro.)
Step 6:
Next, set G1 to do a biofeedback scan.
Go to Presets tab > Choose Biofeedback Sample Digitizer > Choose Hunt and Kill(SD) – JW preset.
Go to Control tab > Tick Overwrite Generator > Select the corresponding port.
Find the “After Scan” panel at the bottom > Tick “Run Hits” and “Continue Refining Hits”.
Enter the port number of G2 in the box after “Run on Gen”.
Enter a number for “Repeat” to set how many times you want to run the preset, or enter 0 if you want the preset to run continuously.
Now you can start doing your biofeedback scan.
Step 7:
After doing the biofeedback scan, you can see your results, which will be sent to G2, and you will start recovering immediately.
Testimonial from Customers
Many people loved our biofeedback function and the Hunt and Kill preset and spoke highly of them. Here is an example of who used the preset to clear a chronic candida ear infection:
Conclusion
What are you waiting for? Try using this setup while with your Spooky2. Remove pathogens in your body and take your first step to better, more holistic health today. The Hunt and Kill preset will never fail you.
You can look at our Spooky2 Products if you are a new Spooky2 User. And if you have any questions, contact our customer service via LiveChat or support@spooky2-mall.com.
Also, welcome to join our Facebook group to find like-minded people and learn more about their successes with Spooky2 products!
I don’t understand step 2.. what liquid sample? .. what does two black E’s mean, and what does ‘clip the slides’ mean? I am new to Spooky but instructions are confusing for me 🙁
Step 2:
After placing the liquid biological sample on one slide, place the other slide on top. The two black Es must face each other.
Clip the slides with the Sample Digitizer, and insert it into the Out1 port of the G2 of GeneratorX Pro.
Dear friend, this blog explains use gx pro to do a biofeedback scan. liquid sample is used for doing biofeedback scan. And the picture in step2 is Slides, and then you will see that it looks like the two black Es in the middle. There is a video about how to use Spooky2 Sample Digitizer: https://www.youtube.com/watch?v=T4nzmA1glKU&t=184s. Also have some relvant blogs here: https://www.spooky2-mall.com/blog/spooky2-sample-digitizer-guidelines/, https://www.spooky2.com/digitizer-remote-scan/. Hope it helps. Any questions, feel free to contact our official email: support@spooky2-mall.com. Here we’ll have someone help you with more detail! Thanks for your understanding! 🙂
Is there a forum for spooky?
Dear lori, yes, here is the link of Spooky2 forum: https://www.spooky2.com/forums/. Welcome to join us!
SP2 Is to be congratulating on establishing such a good support facility. It remains essential for SP2 to continue providing support on every level and for absolute beginners, it may be useful to have an “idiot proof”, set of beginners instruction with photos and instructions at every step. As users continue to use the equipment, they learn about the system and when confident will welcome the early guidance given. Do not be embarrassed at the simplicity of support because there are many users out there who will buy and benefit from SP2 equipment but do not know how to switch on a PC!
I agree. The learning curve is beyond high and some of the videos are confusing. Even with screen captions there are times I still do not understand each so called “step”. The narrator is often not an English first language speaker. With the captions on (I am hard of hearing in one ear and deaf in the other) some of the material is blocked and must repeat the videos several times to attempt understanding, and even then, I am not confident that I truly “get it”. Steps that a new user does not know are assumed as known. Also, what should I do with the biofeedback hits after running a scan? The video I watched didn’t say. Many times, I feel like I am running in the dark and bumping into who knows what.
Thank you for reaching out. I’m sorry to hear about your challenges with the learning materials and accessibility issues. Your feedback highlights important areas for improvement. Sorry for your bad experience.
To get the best guidance, I recommend contacting the official Spooky2 customer service team email:support@spooky2-mall.com
They can provide detailed instructions, troubleshooting help, and personalized support.
And our support website is a great resource for any questions you may have. Feel free to explore and search for information you need. The website address is as follows:https://www.spooky2support.com/hc/en-us
Have a good day!
Can you also do Hunt and Kill with contact?
Dear friend, yes you can use GX/GX Pro to do hunt and kill with contact. Here is a blog about it: https://www.spooky2-mall.com/blog/how-to-do-gx-tens-scan/. Hope it helps. Any questions, feel free to contact our official email address: support@spooky2-mall.com.
Where can I find training sessions. I cant locate them on the website.
Bradley did a good training on this, as well.
Thank-you for all you do for us.
Dear friend, thanks for your approval and praise! You can find it in our channel, and this is the link of biofeedback scan training course: https://www.youtube.com/@Spooky2Rife/search?query=biofeedback%20scan%20training%20course. Hope it helps. Any questions, feel free to contact our official email address: support@spooky2-mall.com.
It looped 3 times and then switched to run the results on G1 Remote. All good. Another question-it’s running the results on my remote however the preset is Hunt and Kill (SD)-JW. Is this correct?
Dear friend, yeah that’s correct. If you have any questions, feel free to contact our official email address: support@spooky2-mall.com. Here we’ll have someone help you with more detail! 🙂
Why set G1 to do biofeedback scan when the digitizer slide is on G2?
Why set G2 to run scan results when the remote is on G1?
Isn’t it the wrong way round?
Confused.
Dear David, so sorry to make you confused. We made some mistakes, which have now been corrected. Maybe you can read this blog again. If you still have any questions, feel free to contact our email: support@spooky2-mall.com. Here we’ll have someone help you with more detail! Thanks for your understanding! 🙂
The instructions mention using generator GeneratorX Pro. Does this mean that if I use GeneratorX (without Pro) biofeedback Hunt and Kill will not work properly? Thank you for the information.
Dear Jaroslav, they are equally effective, we just didn’t list gx, so sorry for the trouble. 🙂
so to summarize…. with the xmpro …run sample dig on g1 and y have the remote on g2. so run the results on the remote on g2 yes?
Dear friend, yes, you connect the Sample Digitizer to the Out1 port of the G1 of GeneratorX Pro for scanning and then connect the Remote to the BN port of the G2’s Boost for running the results of the scan. Any questions, feel free to contact us via email: support@spooky2-mall.com.
Hi, Is it possible to do a Hunt and kill scan using the XM Generator with tens pads? Rather than the GX pro. If so how do I go about doing this? Is there an article about it please?
Dear Anne, we prefer you use GX/GXPro for hunt and kill. Any questions, feel free to contact us by email.
I “think” I understand the process … you place the blood sample in the Sample Digitizer … that goes into G1. You connect the remote to the G2, in the BN connection. If you have the same sample in the G1, but the virus is in your body, how does the XPro know to hunt and kill viruses that morph, if there isn’t a new sample in the G1?
Thank you for your question. When you place a blood sample in the Sample Digitizer on G1, the Spooky2 XPro analyzes the frequencies from the sample, which represent the pathogens in your body. Even if the virus in your body morphs, the system detects these changes through the ongoing frequency analysis. The “Hunt and Kill” process continuously scans and adjusts to target any new or evolving frequencies associated with the pathogens. This means you don’t need to update the sample in G1, as the system adapts to the changes in real-time.
If you have further questions or need more clarification, feel free to ask!
You’re saying that the viruses in the sample may be attempting to morph, and if that is taking place in the sample, the G2 is adjusting the output based on how the sample is “morphing”? However, if the sample is “dry” how is there a virus within the sample anymore?
how do you save the results to a program to run the frequencies at another time with a hunt and kill as it continues on with the kill?
Dear Robin Dylan,
Thank you for your inquiry!
To save the results of a Hunt and Kill Biofeedback scan and run the frequencies at another time while continuing with the kill process, please follow these steps:
1. Complete the Hunt and Kill Scan: Once the scan finishes, Spooky2 will automatically generate the detected frequencies.
2. Save the Results: Click the “Save” button in the results window. Name your file and save it in the default folder or another location of your choice.
3. Create a Custom Program:
– Go to the “Programs” tab in Spooky2.
– Click “Create Program.”
– Import the saved results file and assign the settings for the kill frequencies.
4. Load and Run the Program:
– Navigate to the “Control” tab.
– Load the generator you will use.
– Select your saved program and start the session.
This allows you to rerun the saved frequencies and continue the killing process when needed.
Feel free to reach out if you need further assistance.
Best regards,
Spooky2 Support Team
Hello, how do you do a hunt and kill on Contact? Not a general contact scan, but a hunt and kill. Will you have to be hooked to the the machine all day until no more frequencies are hit?
Hi Edd,
To perform Hunt and Kill using Contact mode, you will need to stay connected to the machine during the process. Spooky2 will continuously scan, detect, and run frequencies in real-time until no new frequencies are found. It’s an ongoing process, so it’s best to do it when you have enough time to stay connected.
Let us know if you need further guidance!
Best regards,
Spooky2 Team
Hi
I would like to check
Once the scan is done on the sample & you have the frequencies, the killing program runs on dna in three remote on the other generator – Is it necessary to leave the digital sample scanner connected with its sample?
Hi Cheryl,
Thank you for your question.
Once the scan is complete and the killing program is running on your remote generator, you do not need to keep the Sample Digitizer connected with the sample.
1. Hunt and Kill Preset
Starts with a scan, then runs hits on a remote generator.
Automatically re-scans and updates hits if pathogens mutate.
Sample only needed during the initial scan.
2. Scan and Run Preset
Scans, runs hits, and repeats until stopped or no hits are found.
Sample must remain in the Sample Digitizer the whole time and be replaced daily.
We recommend running a Baseline scan before all GX biofeedback sessions for better accuracy.
For more details, please check the Biofeedback Scan section in the Spooky2 User’s Guide.
Let us know if you need further assistance.
Best regards,
Spooky2 Team
Can you please example the set up for the hunt and kill using scalar? Do we set up the transmitter and generator the same as doing a biofeedback scan but just pick hunt and kill instead?
“explain”, not example