Clicky
Dark Light

Unlock the Power of Songs of the Spine for Updated Frequency Insights 15

Frequency Research, Spooky2 Software
Share this:

Spine health plays a crucial role in overall well-being, and frequency therapy has emerged as a unique method for addressing spine pain and discomfort. In recent updates, Spooky2’s Songs of the Spine program has undergone significant improvements to optimize the healing potential for the spine using advanced frequency settings. This article will break down these enhancements, explain the science behind the frequencies used, and offer a step-by-step guide on how to maximize your healing experience with this program.

For reference, you can find the original blog post on Songs of the Spine here.

1. The Evolution of Frequencies: Why A=440 Hz Now Takes Precedence

In the earlier versions of the Songs of the Spine program, some users may have encountered A=432Hz frequencies, often associated with their calming effects. However, research and feedback indicated that A=432Hz was not the ideal match for spine healing, as it lacked some critical frequencies and wasn’t properly aligned with the body’s structure. Additionally, the original A=432Hz set was incomplete and not arranged in the correct order to target specific vertebrae.

With the shift to A=440Hz, the program now follows a more accurate sequence of frequencies. These have been validated numerous times to provide a more precise therapeutic impact on the spine. The A=440Hz set aligns better with the vertebrae’s natural frequencies, as originally laid out by Manual Mallo’s research, and is based on conversions from tuning forks to remote frequencies.

In previous content, the explanation of this shift from A=432Hz to A=440Hz was missing. It’s essential to clarify that A=432Hz, while historically significant, does not offer the structural benefits for spine healing that A=440Hz does. This transition was made because A=440Hz has been scientifically validated and tested, showing superior results, especially when addressing specific vertebrae and restoring spinal health more effectively.

How to Adjust to A=440Hz:

  • Make sure your Spooky2 device is updated with the latest software, where the new A=440Hz presets are already integrated.
  • Always follow the Songs of the Spine preset instructions to ensure you are benefiting from the correct frequency.

2. Correct Frequency Sequence: The Importance of Proper Order

One of the significant upgrades in the Songs of the Spine program is the correction of the frequency order. In older versions, some frequencies were either missing or incorrectly ordered, which could result in less effective healing. The current version now features a meticulously organized sequence where each frequency corresponds to the specific vertebra it is designed to heal.

This correction is vital because the spine is a highly structured system, and misalignment or improper sequencing can disrupt its healing. Now, you can rest assured that the program follows the correct order, ensuring comprehensive spine care.

3. The Case for A=444Hz: Exploring Alternative Frequencies

In recent forum discussions, users have brought attention to A=444Hz as an alternative frequency that may offer even greater healing potential for the spine. Research suggests that A=444Hz aligns closely with the body’s natural frequencies, offering a deeper resonance with the vertebrae. Some users report enhanced results using A=444Hz compared to A=440Hz.

While the current Songs of the Spine program is built around A=440Hz, it’s worth noting that other tuning systems like A=444Hz can be explored. This frequency may enhance the healing effects for users who are particularly sensitive to frequency adjustments.

Source: https://www.spooky2.com/forums/viewtopic.php?t=17424

4. How to Apply “Songs of the Spine” Program with Spooky2

Spooky2 has the largest frequency database in the world, including over 60,000 programs and presets, including the “Songs of the Spine” program. It offers five frequency transmission modes: Remote, Contact, Cold Laser, PEMF, and Plasma. Each mode can run the Songs of the Spine, allowing you to choose your preferred one. Let’s take a look at how to run the program using the Remote mode as an example.

Step 1: Make sure your Spooky2 Remote is set up correctly. If you need guidance on setting up the Spooky2 Remote, please click here to watch the guidance video.

Step 2: Open the Spooky2 software and go to the Presets tab. Choose Shell (Empty) Presets > Remote > Healing (R) – JW.

Step 3: Go to the Programs tab, and search for “spine problem.” Then double-click the program to load it.

5. User Testimonials on the ‘Spine Problems A=440’ Program

Success using Song of the Spine

6. Recommended Kits

Share this:

15 Comments

  1. Which update has the 440 Hz frequencies? I downloaded this a few months ago – just want to make sure I’m usaing the latest version.

    1. Hello Ann, here is the latest version of the Spooky2 software https://www.spooky2.com/downloadspage/ Spooky2 3rd September 2024 Full Installer, which includes the 440Hz frequencies. I hope this helps!

  2. Do you have the new audio version for youtube for the songs of spine?

    1. Dear Yodi,

      Thank you for your inquiry! We’re excited to share that the new audio version for the “Songs of the Spine” will be updated on our YouTube channel next Tuesday.

      If you have any further questions, please feel free to contact us at support@spooky2-mall.com.

      Warm regards,
      Spooky2 Customer Support Team

  3. What do you mean by tube? What are tubes?

    1. Dear Stacy,

      Thank you for your comment and question regarding the blog Unlock the Power of Songs of the Spine for Updated Frequency Insights.

      After reviewing the blog, we didn’t find any mention of “tubes.” Could you kindly provide more details or share the exact sentence where this term appears? This will help us better understand your question and provide you with the most accurate information.

      Your clarification will help us provide the most accurate and helpful response. Please feel free to reach out to us at support@spooky2 mall.com.

      Warm regards,
      Spooky2 Customer Support Team

      1. In the screen shot above it mentions tube 1 and tube 2. What are tubes?

        1. Hi Stacy,
          i’m assuming they mean the Spooky2 stainless hand cylinders. which are used for contact mode. usually you hold them in your hands. but as the target in this case was the spine, they used one foot.
          https://www.spooky2-mall.com/product-category/accessories/contact/

          hope that helps

        2. Hi Stacy,
          i’m assuming by tubes they mean the Spooky2 stainless hand cylinders. which are used for contact mode. usually you hold them in your hands. but in this case they used one foot instead.
          https://www.spooky2-mall.com/product-category/accessories/contact/

  4. Can this also be used with contact mode/tens pads? Do have a tens pad recommendation for this? Thank you for your help.

    1. Dear Andi,

      Thank you for your inquiry about the Songs of the Spine Preset.

      This preset is designed to loop continuously and works best in Remote Mode. To use it, connect your Spooky Remote to the “BN” port on the Spooky Boost. Future updates will include compatibility with Contact Mode.

      To use Contact Mode now, follow these steps:

      1. Open the Spooky2 software, go to the Presets tab, and select:
      Shell (Empty) Presets > Contact > Healing (R) – JW.
      2. Go to the Programs tab, search for “spine,” and select Spine Problems A=440 by double-clicking to load it.

      We recommend Spooky2 Contact Accessories, available here:
      https://www.spooky2-mall.com/product-category/accessories/contact/.

      If you have any further questions, please feel free to reach out at support@spooky2-mall.com.

      Warm regards,
      Spooky2 Customer Support Team

  5. I’m confused. Do we run the songs of the spine and the spine problem A440 at the same time?

    thank you

    stephanie allen-palenski
    Reply

    1. Dear Stephanie,

      Thank you for your question! The Songs of the Spine (R)-EV preset and the Spine Problems A=440 programs cannot be run simultaneously as they are designed for different purposes.

      – Songs of the Spine (R)-EV is located under the Presets tab. Select and run it directly for continuous operation until stopped.
      – Spine Problems A=440 is found under the Programs tab. You can select these manually and run them separately.

      Please run one at a time for optimal results. If you have any further questions, please feel free to contact us at support@spooky2-mall.com.

      Best regards,
      Spooky2 Support Team

  6. i’m sorry, it doesn’t let me reply directly to stacy.
    it says “dublicate comment detected”, even before i posted the one in the bottom.
    i don’t know how to remove or fix this. if possible..
    i don’t see an edit option.

    1. Dear Chris,

      Thank you for your comment and for bringing this issue to our attention. We sincerely appreciate your engagement.

      Our team will review and address the duplicate comment error on our backend. Please rest assured that no further action is required on your part at this time.

      If you have any further questions, please feel free to contact us at support@spooky2-mall.com.

      Warm regards,
      Spooky2 Support Team

Leave a Reply

Your email address will not be published. Required fields are marked *

Mini Cart 1

You have 1 item in cart

Subtotal: $994.38
View Cart Checkout