Spooky2 GeneratorX Users Guide 24

Share this:

GeneratorX (GX) is a new entry in the Rife community. It is the world’s most powerful Rife generator, brimming with features. Each GX contains 2 function generators, each with 2 outputs and full biofeedback function. GX can run at 40 MHz with any waveform, and can also load up to 30 programs from Spooky to run standalone without a computer.

You can check and download the printable users guide from here:
https://www.spooky2-mall.com/download/Spooky2_GeneratorX_Users_Guide.pdf

You can check how to do GeneratorX biofeedback scan from the video below:

For more GX videos, please check:
http://www.spooky2videos.com/categories/spooky2-generatorx/

Share this:

24 Comments

  1. how can I erase just a single program from GX memory without loosing all the
    other programs at once?

    1. Hi, you can go to the load page and click remove button to erase the one you want.

      1. There is no load page that I can see. There is a control page. It has an ERASE tab. This asks to erase ALL the loaded programs. So is there a way to view all the loaded programs and delete one by one

        1. Hi, if you want to view loaded programs, you can go to Programs tab and the programs loaded is at the left corner. You can double click to delete it.

  2. Does taking a shower before a biofeedback scan improve the accuracy of the scan? Also, on the 11/22/19 new software release, the button to “Run Baseline scan before BFB” should improve accuracy of scan but I don’t see it in this video.

    1. Hi, for baseline, please go to this link: https://www.spooky2-mall.com/blog/performing-extremely-accurate-biofeedback-scan-using-baseline/
      You can take a shower and keep relaxed during a scan.

  3. Hi do I have to set up genx for terrain or can it just run from the computer. Does it need to be loaded onto genx first before starting terrain

    1. YOu can set up genx for terrain from the computer, and you can also load terrain into generatorX, then use it without the computer. For more details, you can check this link:https://www.spooky2-mall.com/blog/how-to-load-and-run-terrain-protocol-using-generatorx/

  4. Hi, my wife has amalgam fillings, a metal tooth brace and a metal pin in her foot. I know I should select for her the Terrain minus mercury because of her amalgam fillings but should we avoid the Terrain program completely because of the other metals?

    1. Hi, please do not need to worry. It is safe to use the standard Terrain (without the minus mercury) to detox heavy metals. The frequencies will not affect your amalgams but will remove mercury from your tissue.

  5. Hello, I am just starting with Spooky2 GeneratorX and I am having problems loading different treatments in both generators. Whatever I load in one generator is duplicated in the second Generator and if I delete presets loaded in one of them it is also deleted in the other. Is like they are working in mirror mode. I have been very careful overwriting one Generator when I load the preset but it overwrites both. How can I solve this?

    1. Hi, this is how the program is set. No matter which generator you load the program into, the two generators of GX share the program. You can see more from here: https://www.spooky2-mall.com/blog/how-to-load-the-program-and-run-generatorx-standalone/

  6. How much is this?

    1. Hi, we have many products to choose. It depends on your needs and your budget. You can have a look at our mall website: https://www.spooky2-mall.com/
      And you can tell our customer service the health issues you want to handle and your budget, they will give the best choice for you.

  7. Hi there. Just got my Gen x. Did the software and driver download. How do I now get the programs on my generator? Open the program then??? Pic 200? Will it guide me. It is supposed to stand alone correct?

    1. Hi, you need to download our software and driver from this page: https://www.spooky2-mall.com/downloads/
      And l think this training course can help you a lot: https://www.youtube.com/watch?v=IQd4II5TjHA&list=PLyBlPgYV4wN2B1PbayEo9OX_FzWDiNY9D&index=32
      Any questions, please feel free to send to [email protected], our customer service are willing to help you at any time.

  8. I have ulcerative colitis, will the Spook2 GeneratorX kit work to cure it? Ulcerative colitis is not on the list conditions on our web site.

    Richard K Gregg
    1. Hi, GX Kit is enough for colitis. You can search the keyword “colitis”, and then you will find many available programs. Any questions, please feel free to send to [email protected], our support team is willing to help you at any time:)

  9. Hola, when using remote, there is only one red light on the left that is on ,light on . Is it normal ? I ma using the gen X without computer connection . Thank you very much.

    1. Hi, it seems to be normal. The condition of remote light depends on the frequencies you are running. See more details about the theory of remote light from this blog: https://www.spooky2-mall.com/blog/how-does-spooky-remote-light/
      If you still have some doubts about your remote, you can do a signal test to check whether your remote works well or not: https://www.spooky2-mall.com/blog/how-to-test-generators-output-using-spooky-remote/

  10. Will this machine be able to imprint frequencies into a medium to be taken orally by the client that will continue to work on their specific issue?

    1. Hi, Annie. I think you will be interested in Spooky2 Frequency Imprinting, you can learn more details from this blog: https://www.spooky2-mall.com/blog/easy-spooky2-frequency-imprinting/
      https://www.spooky2-mall.com/blog/experiment-on-frequency-imprinting-does-imprinted-water-work/

  11. Hi spooky2 team, hope you’re all doing well and are as healthy as can be!
    My question about the generator X pro is can I run it on a backup power station of 1000watts,
    How many watts does the generator X pro need to run?
    and could I run the scalar units on the same power station? How many watts does the scalar units need to run? Many thanks 🙏 Vanessa

    Vanessa Doherty
    1. Hi, yes. You can run GX Pro on a backup power station of 1000 watts. It needs to run with 24W. Any questions, please feel free to send them to [email protected], our technical staff will help you have a further check and give you much more professional advice:)

Leave a Reply

Your email address will not be published.