Dark Light

Terrain Protocol: The Magical Frequencies of Body Cleansing 14

Share this:

At Spooky2, we always recommend our Spooky2 users start Rifing with Terrain Protocol. The answer is actually simple. The Terrain protocol helps flush out accumulated toxins and prepares your body so that it is ready to receive further Rife treatments.

We take in toxins from food, drink, or even the air we breathe, and our body naturally expels them. However, our bodies cannot discard these toxins fast enough due to too much pollution in the surrounding environment these days.

With all the toxins piling up in your body system, Rife frequency energy cannot pass through your cells and organs effectively. So, the Terrain Protocol is highly recommended for new customers as it is a carefully planned detoxification process.

Click here to learn more about why we recommend the Terrain Protocol as a first step.

Where can I find the Spooky2 Terrain Protocol?

After you have successfully installed the Spooky2 software, you can find the Terrain Protocol either in “Detox – Remote – Terrain (R) – BY” or search “terrain” in the search box under the Presets tab.

Six Terrain Protocol Modes for You to Choose

Spooky2 is the most highly advanced and versatile Rife system in the world. It offers five modes of frequency transmission: Contact Mode, Remote Mode, Plasma Mode, PEMF Mode, and Cold Laser Mode. In addition to these built-in mode selections, Spooky2 Rife also works well with Spooky2 Scalar – Scalar Mode.

The Terrain Protocol can be applied to all these six modes.

Remote Mode

Remote mode is the option most people prefer. This mode frees people from connecting to machines and allows them to carry out daily activities. If you choose this mode, Terrain Protocol will run for 11 days nonstop and repeats itself until you manually stop it.

During this time, the preset will automatically change settings to suit the treatment type.

The preset contains several smaller presets, each loading after the other.

The list of daily schedules for programs in this preset:
  • Preset 1: Day 1 – Remove Metals (runs for 24 hours)
  • Preset 2: Day 2 – Remove Metals (runs for 24 hours)
  • Preset 3: Day 3 – Remove Chemical Materials (runs for 24 hours)
  • Preset 4: Day 4 – Remove Systemic Toxins 1 (runs for 24 hours)
  • Preset 5: Day 5 – Remove Systemic Toxins 2 (runs for 24 hours)
  • Preset 6: Day 6 – Remove Intestinal Toxins (runs for 12 hours)
  • Preset 7: Day 6 – Remove Systemic Toxins 3 (runs for 12 hours)
  • Preset 8: Day 7 – Parasites and Liver Function (runs for 24 hours)
  • Preset 9: Day 8 – Kidney Function 1 (runs for 24 hours)
  • Preset 10: Day 9 – Kidney Function 2 (runs for 12 hours)
  • Preset 11: Day 9 – Cleanse Blood (runs for 12 hours)
  • Preset 12: Day 10 – Kidney and Liver Toxins (runs for 12 hours)
  • Preset 13: Day 10 – Intestinal Parasites (runs for 12 hours)
  • Preset 14: Day 11 – Lymphatic System 1 (runs for 12 hours)
  • Preset 15: Day 11 – Lymphatic System 2 (runs for 12 hours)

It also allows you to run the specific preset based on your conditions.

For example, if l want to run Preset 3: Day 3 – Remove Chemical Materials, load all the Terrain Protocol, and then change the specific Preset # under the Control tab.

This is also how to resume your Terrain Protocol if you accidentally interrupted your protocol.

Three types of Terrain Protocol:

Terrain (R) – BY: This is the original version of Terrain Protocol and includes all of the above programs. Most people will choose this version to start detox.

Terrain-Mercury (R) – BY: This preset is a variant of the Terrain Protocol without the mercury-detox frequencies, which is useful for people who have mercury amalgam fillings and do not want to experience a mercury detox.

Terrain-Nonviolent (R) – BY: This version does not kill bacteria or parasites. It is useful for those who experience bad Herx reactions by the toxin influx that kills bacteria and viruses in the system.

Each of these three Terrain Protocols comes with its low-power version. These low-power versions are useful for sensitive people and pets.

The Terrain Protocol can be run on a single Spooky2 Remote but is enhanced if you run it concurrently with Spooky2 Central, Plasma, Scalar, Contact, Laser, or PEMF Coil mode.

Other Modes

Compared to Remote mode, other modes require you to activate each preset manually every day. Each frequency set runs for 2 hours and is followed by a 3-minute beep. So, after you click to start the preset, the current one will run for two hours. On the second day, you will need to select the preset for the next sequence and click Start.

You can learn more details from its Note area:

Share this:

14 Comments

  1. Can Terrain Protocol be imprinted on a sticker to wear on the body and work just as effectively?

    1. Yes, you can imprint it but will be less effective than running through rife machines:)

  2. BioFeedback gives you a scan result and then you can run programs based on that, but does Terrain? It would be nice to know what it’s finding, I think. I understand that it will run continuously, even after the cycle completes in 11 days, so do most people just run it continuously or do you run it for 11 days once a month, or what? I had several false starts, getting to day 5 or 6, then it stopped and I didn’t know how to resume it so started over at the beginning. So far, the current set has been running for almost 6 days, so fingers crossed that it finishes. So, I guess I just want guidance as to what I should do, continue or stop after 11 days. And, what do I do after that time? I ran the biofeedback via pulse and digitizer and am running the resulting frequencies on another generator and then I have a general detox running on another one. Should I be doing anything else? I have not noticed any ill effects/herx/headache, nothing so far at all, which I guess is a good thing. Any thoughts?

    1. Hi, Trudy. Terrain Protocol just helps your body flush out toxins, and won’t give you a result. Most Spooky2 users who own multiple generators will spare one specific generator to run terrain continuously. If you do not have too many generators, you can run terrain for one cycle, and then do some other frequency treatment as you wish. About how to resume terrain, you just need to change the specific Preset # under the Control tab.

  3. Hello, if I use liquid zeolite (clean slate) for more than 2 years which cleans body of all toxins also some from our brains. Do I still need to do this terrain for 11 days before I start with other things?

    And also, can i put more DNAs in 1 remote for detoxification (11 days)?

    thank you

    1. Hi, we still recommend terrain protocol as the first step, but all is your choice.
      Of course you can put more than one DNA in one remote as long as the lid can close properly:)

  4. Now I’m super confused… I just watch a video where this lady manually added all of these to her generator on remote (all 15 individually), and this article is saying we don’t have to do that…?
    Please clarify so that I can get all of the benefits from terrain protocol.
    https://www.youtube.com/watch?v=8DnwpC2izEg

    1. Dear friend, so sorry to make you confused. GX Pro can load 30 programs per time. You can decide whether to download all programs into the generator according to your own preferences. We have some blogs about terrain protocol: https://www.spooky2-mall.com/blog/all-you-need-to-know-about-terrain-protocol/, https://www.spooky2-mall.com/blog/how-to-load-and-run-terrain-protocol-using-generatorx/. Hope it helps. Any questions, feel free to contact our email: [email protected]. Here we’ll have someone help you with more detail!

      1. Dear sir
        In terrain protocol, can I put de nail of many persons on the spooky2 remote V2.0 ?
        What generator do I have to use , on remote mode,
        Generator 1, or 2 or. any generator?

        1. Dear Ronal, for a program like Detox that works for most people, you can put different nails as samples in the same Remote. But remember to keep the samples of different people separate. For Remote mode, first connect Boost to either G1 or G2, then just connect the remote to Boost’s BN port. Hope it jelps. Any questions, feel free to contact us by email: [email protected].

  5. I load 6 or more programs to run at knight when I check …its still on the first one hours later….it doesn’t go to the next program.

    carole o'sullivan
    1. Dear Carole, when you load the programs into your generator, you need to change them manually. You can use the “Up” and “Down” button to select the program you want to run. You can click this link and learn how to do that. https://www.youtube.com/watch?v=FpM4kIdn__Y If you have more questions, welcome to contact us.

  6. Do the red lights at the bottom of the remote stay on all the time while it’s running off of Gen X? I’ve only seen the lights on once on da one. I’m on day 3.bi can see the Gen X going through all the frequencies but haven’t noticed the red lights on at the bottom other than the one time on day 1

    1. Dear Marci, whether Remote’s light is on or not is affected by the amplitude, frequency, and waveform, you can check out this blog about Remote LED lights, it will also tell you what to do when Remote’s LEDs don’t light up: https://www.spooky2-mall.com/blog/what-does-your-spooky2-remote-led-light-indicate/. Hope it will help you. If still have questions, feel free to send them in the form of videos or pictures to our email: [email protected]. Our engineers will help you to solve your problem. Thanks for your support and love!

Leave a Reply

Your email address will not be published. Required fields are marked *